Hotpoint washing machine RSG 1025 J EU manual

The Hotpoint RSG 1025 J EU is a freestanding washing machine with a 10 kg load capacity, 1200 RPM spin speed, and energy efficiency class A. It features multiple wash programs, a delay timer, child lock, anti-flood system, and self-cleaning detergent drawer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Load Capacity	10 kg maximum load
Spin Speed	Up to 1200 RPM
Energy Class	A (energy efficient)
Programs	15 wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Anti-Flood System	Automatic water shut-off in case of leak detection
Self-Cleaning	Automatic cleaning cycle for detergent drawer and drum
Display	Digital display showing time remaining, program, and options
Door Lock	Automatic door lock during operation for safety

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn clockwise/anti-clockwise to level machine; use spirit level.
Connect water inlet: Attach inlet hoses to cold water tap (blue) and hot water tap (red) if available.
Connect drain hose: Place in standpipe (min height 60 cm) or hook over sink edge.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in machine; follow initial setup.

Run first wash: Select Cotton program at 90°C without laundry to clean drum.
Set language: Press and hold START/PAUSE and OPTIONS for 3 seconds to select language.
Test programs: Run empty wash to ensure proper operation.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Ensure water taps are fully open and hoses are not kinked.

Specifications

Model: RSG 1025 J EU
Capacity: 10 kg
Spin Speed: 1200 RPM
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230-240V ~ 50Hz
Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
Water Consumption: 52 liters per cycle (Cotton 60°C)
Noise Level: 53 dB (washing), 73 dB (spinning)
Programs: 15 including Eco 40-60, Wool, Sport, Anti-Allergy

Controls and Settings

Control Panel: POWER button, program selector knob, OPTIONS buttons, START/PAUSE, digital display.

Programs: Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash (30 min), Wool, Silk, Sport, Anti-Allergy, Drum Clean.

Options: Extra Rinse, Pre-wash, Delay Start (1-24h), Reduced Creases, Speed Wash. Settings: Child Lock (press and hold OPTIONS + START for 3 seconds), Temperature selection, Spin speed selection (400-1200 RPM).

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water; red to hot water if available. Drain: Place hose in standpipe or over sink.

Turn off water taps before connecting hoses.
Use only supplied hoses; do not extend or replace with non-approved hoses.
Ensure drain hose is not submerged in water to prevent siphoning.
Check for leaks after first connection.

Tip: Install drain hose at recommended height (60-100 cm) for proper drainage.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color and fabric type.
Load machine: Do not exceed 10 kg; distribute evenly.
Add detergent: Use compartments I, II, * as needed.
Select program: Turn knob to desired program.
Set options: Press OPTIONS for extra rinse, temperature, etc.
Start: Press START/PAUSE; door locks automatically.
Pause/Stop: Press START/PAUSE to pause; turn knob to reset to stop.
After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during wash; wait for door lock light to go off.

Safety Features

Child Lock: Prevents program changes during operation. Anti-Flood: Stops water intake if leak detected. Door Lock: Automatic lock during wash cycle. Overheating Protection: Thermal cut-off if temperature exceeds safe limit.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Run Drum Clean program every 30 washes. Clean drain pump filter periodically.

CAUTION! Do not use abrasive cleaners; never hose down machine.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. For support, visit www.hotpoint.eu or contact Hotpoint customer service at +800 2345 2345 (toll-free within EU).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START firmly.
No water intake	Taps/hoses/filter	Open water taps; check hose kinks; clean inlet filter.
Water doesn't drain	Drain hose/pump filter	Check drain hose height; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes on display	Various faults	Refer to manual error code list; common: F01 (door issue), F05 (drain problem).

Reset: Unplug for 1 minute to reset electronic control.

Service: +800 2345 2345; www.hotpoint.eu