Hotpoint washing machine RSF 723 S IT manual

The Hotpoint RSF 723 S IT is a freestanding washing machine with a 7kg capacity, 1200 RPM spin speed, energy rating A+++, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, anti-crease function, and imbalance detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum with stainless steel interior, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Capacity	7 kg (dry laundry)
Spin Speed	Up to 1200 RPM
Energy Rating	A+++ (most efficient)
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Display	Digital display with time remaining, cycle stage
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles after wash
Imbalance Detection	Automatically redistributes load
Door Lock	Automatic during cycle

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet clockwise/counter-clockwise; use spirit level.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine.
Connect drain hose: Place in sink or standpipe (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first use, run a maintenance wash.

Check installation: Ensure machine is level, hoses secure.
Power on: Plug in; press POWER button.
Run initial cycle: Select Cotton 90°C program without laundry; add 100 ml detergent.
Set preferences: Use OPTIONS button to set beep volume, default spin speed.
Load laundry: Sort by fabric type and color; do not exceed 7 kg.

CAUTION! Ensure water taps are fully open before starting a wash.

Specifications

Model: RSF 723 S IT
Capacity: 7 kg
Spin Speed: 1200 RPM (adjustable)
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230-240V, 50Hz
Programs: 15 including Eco 40-60, Wool, Sport, Bed Linen
Noise Level: Wash: 53 dB, Spin: 75 dB
Weight: 68 kg
Energy Consumption: 170 kWh per year

Controls and Settings

Control Panel: POWER button, Program selector knob, START/PAUSE, OPTIONS, Delay Start, Child Lock.

Display Icons: Wash, Rinse, Spin, Door Lock, Child Lock, Time remaining.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics). Options: Press OPTIONS to adjust spin speed (400-1200 RPM), temperature (cold-90°C), extra rinse. Delay Start: Press button, use +/- to set hours (1-24). Child Lock: Press and hold 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water tap. Drain: Place hose in sink or standpipe.

Turn off water tap before connecting hoses.
Use only supplied hoses; do not overtighten.
Ensure drain hose is not kinked and is secure.
Check for leaks after first connection.

Tip: Use a drain hose extension if needed; max length 150 cm.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load sorted items, close firmly.
Add detergent: Pour into dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Adjust options: Press OPTIONS to set temperature, spin speed, extra rinse.
Start: Press START/PAUSE; door locks, cycle begins.
Pause/Stop: Press START/PAUSE to pause; turn knob to reset to stop.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during wash; wait for unlock signal.

Special Functions

Delay Start: Set wash to begin later (1-24 hours). Child Lock: Locks controls during cycle. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Imbalance Detection: Automatically redistributes load if uneven; may reduce spin speed.

Care & Cleaning

Regular maintenance ensures performance.

Clean detergent dispenser: Remove monthly, rinse under water.
Clean door seal: Wipe monthly to remove lint and residue.
Run maintenance wash: Monthly, use Cotton 90°C program without laundry.
Clean filter: Turn off machine; open filter cover at front; drain water; remove and clean filter.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with EU directives: Low Voltage, EMC, Ecodesign, Energy Labeling. Waste disposal: Dispose according to local regulations; contact municipal waste facility. For support, visit www.hotpoint.eu or contact 0333 305 1254 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power outlet; press START/PAUSE.
No water intake	Taps closed/hose kinked	Open water taps; check hose for kinks; clean inlet filter.
Water not draining	Drain hose blocked	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts not removed/uneven load	Remove transit bolts; redistribute laundry; ensure machine is level.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 1254; www.hotpoint.eu