Hotpoint washing machine RPG 846 DD EU manual

The Hotpoint RPG 846 DD EU is a freestanding washing machine with a 6 kg load capacity, featuring a D energy rating, 1200 RPM spin speed, and multiple wash programs for efficient cleaning. It includes an A+++ energy efficiency rating for specific cycles, delay timer, child lock, and various fabric-specific programs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

FeatureDescription
Load Capacity6 kg (cotton)
Spin SpeedUp to 1200 RPM
Energy RatingD (overall), A+++ for 40°C cotton cycle
Programs14 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
DisplayLED with time remaining, cycle stage indicators
DoorReversible, with safety lock
Dimensions (HxWxD)85 x 60 x 55 cm
Water Pressure0.5 - 8 bar

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level.
  3. Connect water inlet: Attach hoses to hot/cold taps (blue for cold, red for hot).
  4. Connect drain hose: Place in standpipe or sink hook; ensure no kinks.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Run an empty cotton cycle at 90°C to clean drum.

  1. Check installation: Ensure machine is level, hoses secure.
  2. Open water taps: Turn fully on.
  3. Add detergent: Pour into compartment II (main wash) of dispenser.
  4. Select program: Turn knob to "Cotton 90°C".
  5. Start cycle: Press Start/Pause; let complete.
  6. Set preferences: Use option buttons for spin speed, temperature, etc.

CAUTION! Do not load laundry during first cleaning cycle.

Specifications

Controls and Settings

Control Panel: Rotary program selector, LED display, option buttons, Start/Pause.

Buttons: Start/Pause, Delay Start, Option (Temp, Spin, Extra Rinse), Child Lock.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic). Options: Adjust temperature (cold to 90°C), spin speed (0 to 1200 RPM), extra functions. Display: Shows time remaining, cycle stage, selected options. Child Lock: Press and hold Option buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (hot/cold). Drain: Hose to standpipe or sink.

  1. Ensure taps are off before connecting hoses.
  2. Use supplied hoses; do not reuse old ones.
  3. Secure drain hose at 60-100 cm height to prevent siphoning.
  4. Check for leaks after first connection.

Tip: Use hose clips if not provided. Ensure drain hose is not submerged.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 6 kg; distribute evenly.
  2. Add detergent: Use compartments I (prewash), II (main wash), * (fabric softener).
  3. Select program: Turn knob (e.g., Cotton for linens, Synthetic for blends).
  4. Adjust options: Press Temp/Spin buttons to modify.
  5. Start: Press Start/Pause; door locks automatically.
  6. Pause/change: Press Start/Pause to stop; wait 2 minutes to unlock door.
  7. End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during spin cycle. Unbalanced load may cause vibration.

Special Functions

Delay Start: Press Delay button to set start time (1-24 hours). Extra Rinse: Adds rinse cycle for sensitive skin. Prewash: For heavily soiled loads. Speed Wash: Reduces time for lightly soiled loads. Child Lock: Locks control panel.

Care & Cleaning

Clean detergent dispenser monthly: Pull out, rinse under tap. Clean drum: Run empty 90°C cycle monthly. Clean filter: Turn off machine, open flap at front right, place towel, unscrew filter cap, clean debris.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label according to EU regulation 2019/2014. Waste disposal: Do not dispose with household waste; take to designated collection point. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/doorCheck plug, power; ensure door closed properly.
No water intakeTaps/hoses/filterOpen taps; check hoses for kinks; clean inlet filter.
Water does not drainDrain hose/filterCheck hose for kinks; clean pump filter.
Excessive vibration/noiseTransit bolts/loadEnsure transit bolts removed; redistribute load evenly.
Poor washing resultsDetergent/programUse correct detergent amount; select suitable program.
Error codes on displayVarious faultsConsult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu

Hotpoint washing machine RPG 846 DD EU manual © - All Rights Reserved 2025