Hotpoint washing machine RPG 845 J manual

The Hotpoint RPG 845 J is a freestanding washing machine with an 8kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	8 kg (dry laundry)
Spin Speed	Up to 1400 RPM
Energy Rating	A+++
Display	Digital with time remaining indicator
Programs	14 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Door	Reversible for left/right opening
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove all four bolts from rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread). Ensure washers are fitted.
Connect drain hose: Place into standpipe or sink; secure with U-bend to prevent siphoning.
Level the machine: Adjust front feet using spanner; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; perform initial setup.

Run a maintenance wash: Select Cotton 90°C program without laundry and with detergent to clean drum.
Set language: Press and hold PROGRAM + OPTION buttons for 3 seconds to cycle through languages.
Test water connections: Run a short rinse cycle to check for leaks.
Familiarize with controls: Review program chart on control panel.

CAUTION! Ensure machine is level and not touching walls or cabinets to reduce vibration.

Specifications

Model: Hotpoint RPG 845 J
Capacity: 8 kg
Spin Speed: 1400 RPM (adjustable)
Energy Consumption: 0.85 kWh per cycle (Cotton 60°C)
Water Consumption: 48 liters per cycle (Cotton 60°C)
Noise Level: 53 dB (washing), 73 dB (spinning)
Programs: 14 including Eco 40-60, Wool, Sport, Anti-Allergy
Power Supply: 220-240V, 50Hz, 10A
Weight: 68 kg

Controls and Settings

Control Panel: POWER button, PROGRAM selector knob, OPTION buttons (Delay Start, Extra Rinse, etc.), START/PAUSE button.

Display: Shows program duration, time remaining, selected options, and error codes.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics). Options: Press corresponding button to activate (e.g., Pre-Wash, Speed Wash). Delay Start: Set delay up to 24 hours. Child Lock: Press and hold CHILD LOCK button for 3 seconds. Spin Speed: Adjust with SPIN button (RPM or No Spin). Temperature: Adjust with TEMP button (Cold to 90°C).

Connecting Water & Drain

Water Inlet: Cold fill only (hose provided). Drain: Hose diameter 19 mm, max height 100 cm.

Ensure water tap is fully open.
Check hose for kinks.
Drain hose must not be submerged in water.
Use hose clip if extending drain hose.

Tip: Install a drip tray if placing on wooden floors.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 8 kg; distribute evenly.
Add detergent: Use dispenser drawers (I: Pre-wash, II: Main wash, *: Fabric softener).
Select program: Turn knob (e.g., Cotton for linens).
Adjust settings: Temperature, spin speed, options as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/Modify: Press START/PAUSE to pause; wait for door unlock symbol.
End of cycle: Signal sounds; door unlocks after a short time.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Delay Start: Set washing to finish at desired time. Child Lock: Disables controls except POWER. Extra Rinse: Adds rinse cycle for sensitive skin. Speed Wash: Reduces cycle time for lightly soiled loads. Anti-Crease: Tumbles periodically after cycle to reduce wrinkles.

Care & Cleaning

Unplug before maintenance. Monthly: Clean detergent drawer and rubber door seal. Quarterly: Run maintenance wash (90°C without laundry). Annually: Check inlet hose filter for debris.

CAUTION! Do not use abrasive cleaners on door or drum. Keep ventilation openings clear.

Regulatory Information

CE compliant; meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure child lock is off; close door firmly.
No water intake	Tap/hose/filter	Open tap fully; straighten hose; clean inlet filter.
Water doesn't drain	Drain hose/kink/pump	Check for kinks; clean pump filter; ensure height < 100 cm.
Excessive vibration/noise	Transit bolts/leveling/load	Remove transit bolts; re-level machine; redistribute load.
Error code on display	See manual chart	Refer to error code list; common: F01 (door issue), F05 (drain problem).

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu