Hotpoint washing machine RPG 744 J manual

The Hotpoint RPG 744 J is a freestanding washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1400 RPM, delay timer, child lock, and anti-flood protection. Designed for standard household use with 230V~50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent dispenser, drum, filter, and adjustable feet.

Feature	Description
Capacity	7kg dry laundry
Spin Speed	Up to 1400 RPM
Energy Class	A (Energy Efficient)
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop system
Display	LED with time remaining and cycle indicators
Door	Reversible for left/right opening
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Position machine: Ensure at least 1cm space from walls and cabinets.
Adjust feet: Use spanner to level the machine; check with spirit level.
Connect water inlet: Attach supplied hose to cold water tap (3/4” thread).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Plug into grounded power outlet.

WARNING! Do not remove transit bolts before moving to final position. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

Turn on water tap fully.
Plug in machine and press POWER button.
Select “Cotton 90°C” program without laundry.
Add a small amount of detergent to dispenser drawer.
Press START/PAUSE to begin cycle.
After completion, machine is ready for use.

CAUTION! Ensure transit bolts are removed. Do not skip the first empty wash.

Specifications

Model: Hotpoint RPG 744 J
Capacity: 7 kg
Max Spin Speed: 1400 RPM
Energy Rating: A
Water Pressure: 0.5 - 10 bar
Power Supply: 230V~50Hz
Programs: 15 including Eco, Wool, Sport, Rinse & Spin
Noise Level: Wash: 56 dB, Spin: 76 dB
Dimensions: 85 x 60 x 60 cm (HxWxD)
Weight: 68 kg

Controls and Settings

Control Panel: Rotary selector, START/PAUSE button, OPTION buttons (Delay, Extra Rinse, etc.), LED display.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, etc.).

Options: Press OPTION buttons to modify: Delay Timer (1-24h), Extra Rinse, Reduced Creases, Speed Wash.

Temperature: Auto-selected per program; adjustable on some programs (30°C-90°C).

Spin Speed: Adjustable (0-1400 RPM) or select Rinse Hold.

Child Lock: Press and hold CHILD LOCK button for 3 seconds.

Connecting Water & Drain

Water Inlet: Cold water only. Drain: Via hose to sink or standpipe.

Ensure water tap is off before connecting hose.
Screw inlet hose to machine first, then to tap. Hand-tighten only.
Place drain hose in standpipe (min diameter 4cm) or over sink edge.
Secure drain hose with provided hook if needed.

Tip: Check for leaks after first connection. Do not kink or bend hoses sharply.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7kg. Distribute evenly.
Add detergent: Pour into correct compartment of dispenser (I: pre-wash, II: main wash, *: softener).
Close door firmly.
Select program with rotary knob.
Adjust options (temperature, spin, extra functions) if needed.
Press START/PAUSE to begin.
At end of cycle, “End” appears. Unload promptly.

WARNING! Do not open door during wash or spin. Wait until “Door Locked” light goes off.

Special Functions

Delay Timer: Set wash to start later (1-24h). Extra Rinse: Adds rinse cycle for sensitive skin. Reduced Creases: Reduces spin speed to minimize wrinkles. Speed Wash: Reduces cycle time for lightly soiled loads. Child Lock: Locks controls when activated.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent dispenser: Pull out drawer, rinse under tap monthly.
Clean filter: Turn off machine, open filter cover at front bottom, place towel, unscrew filter cap, clean debris.
Clean drum: Run empty “Cotton 90°C” cycle monthly without laundry.
Wipe door seal and glass: Use damp cloth to remove lint and residue.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with EU directives for safety (EN 60335-1, EN 60335-2-7) and electromagnetic compatibility (EN 55014-1, EN 55014-2). Energy label according to EU regulation 1061/2010. Disposal: Follow local regulations for WEEE. For support, visit www.hotpoint.eu or contact Hotpoint Assist at 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power, door, child lock	Check plug, socket; ensure door closed; deactivate child lock.
No water intake	Tap, hose, filter	Ensure tap is on; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose, pump filter	Check hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts, leveling, load	Ensure transit bolts removed; re-level machine; redistribute laundry.
Error codes (e.g., F01, F05)	Fault detected	Consult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu