Hotpoint washing machine RPD 9467 JGG UK manual

The Hotpoint RPD 9467 JGG UK is a freestanding washing machine with a 9kg load capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 rpm, delay timer, child lock, and anti-flood protection. Designed for UK household use with 230-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	9kg drum for large household loads
Spin Speed	Up to 1400 rpm for efficient drying
Energy Rating	A+++ for low energy consumption
Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop system for leak prevention
Display	LED digital display showing time, cycle, and status
Door	Large porthole door with safety lock
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if applicable (red marker).
Connect drain hose: Place in standpipe or sink; ensure no kinks.
Level the machine: Adjust front feet using spanner; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure water pressure is between 0.5 and 10 bar.

First-Time Setup

Plug in and run a maintenance wash before first use.

Power on: Press POWER button; display lights up.
Run initial wash: Select Cotton 90°C program without laundry; add detergent to drawer II.
Set preferences: Use OPTIONS button to select spin speed, temperature, etc.
Activate child lock: Press and hold CHILD LOCK for 3 seconds if needed.

CAUTION! Ensure transit bolts are removed to prevent damage. Check for water leaks after first connection.

Specifications

Model: RPD 9467 JGG UK
Capacity: 9 kg
Spin Speed: Up to 1400 rpm
Energy Class: A+++
Water Consumption: Approx. 50 litres per cycle (cotton 60°C)
Noise Level: Washing: 53 dB; Spinning: 75 dB
Programs: 15 programs including Eco 40-60, Daily Quick, Sport, etc.
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230-240V, 50Hz, 10A
Weight: 70 kg

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM selector knob, OPTIONS buttons (Temp, Spin, Delay), CHILD LOCK, and display.

Display Icons: Wash cycle, temperature, spin speed, time remaining, delay start, child lock.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, Wool, etc.). Options: Adjust temperature (cold to 90°C), spin speed (0 to 1400 rpm), delay timer (1-24h). Special Functions: Extra Rinse, Pre-Wash, Anti-Crease. Child Lock: Press and hold for 3 seconds to lock/unlock controls.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Hose to standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Use supplied hoses; do not reuse old ones.
Secure drain hose to prevent slipping.
Check for leaks after first run.

Tip: Use hose clips for secure connections. Do not extend drain hose beyond 150 cm.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pour into drawer I (pre-wash), II (main wash), III (fabric softener).
Select program: Turn knob (e.g., Cotton for towels/bedding).
Set options: Press TEMP/SPIN/DELAY to adjust.
Start: Press START/PAUSE; door locks automatically.
Pause/Add: Press START/PAUSE to pause; wait for door unlock to add items.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes. Remove items promptly to avoid creasing.

Special Functions

Delay Start: Set 1-24 hours delay. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads. Anti-Crease: Tumbles periodically after cycle to reduce wrinkles. Child Lock: Locks control panel.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners. Check drain filter periodically for blockages.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016. CE marked. Energy label according to EU regulations. Copyright © Hotpoint. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure child lock off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling/load	Remove transit bolts; level machine; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 mins, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk