Hotpoint washing machine RPD 1047 DX EU manual

The Hotpoint RPD 1047 DX EU is a freestanding washing machine with a 10kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features Hotpoint's AquaCare™ technology for reduced water consumption, a Direct Spray system for efficient rinsing, anti-allergy cycle, quick wash options, delay timer, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent dispenser, drum, filter, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
2. Connect drain hose: Place into standpipe or sink, ensuring no kinks and a minimum height of 60 cm.
3. Level the machine: Adjust the four feet using a spanner until the machine is stable and does not rock.
4. Plug into a grounded 220-240V, 50Hz AC power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Always use new hoses; do not reuse old ones.

First-Time Setup

Before first use, run a maintenance wash to clean the drum and remove any residues.

1. Ensure the machine is empty. Close the door.
2. Pour 100ml of bleach or a washing machine cleaner into the drum (not the dispenser).
3. Select the "Cotton" program at 90°C and start the cycle.
4. After completion, the machine is ready for normal use.

CAUTION! Remove all transit bolts before operation. Failure to do so will cause severe damage and vibration.

Specifications

• Model: RPD 1047 DX EU
• Type: Freestanding Front Loader
• Capacity: 10 kg (dry cotton)
• Max Spin Speed: 1400 RPM
• Energy Class: A+++
• Water Consumption: Approx. 52 litres per cycle (Cotton 60°C)
• Noise Level (Wash/Spin): 53 dB / 74 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Power Supply: 220-240V ~ 50Hz
• Programs: 16 including Cotton, Synthetics, Delicates, Wool, Anti-Allergy, Quick Wash

Controls and Settings

Access functions via the rotary selector and touch buttons.

Control Panel: Rotary Program Selector, Start/Pause button, Delay Timer button, Option buttons (e.g., Extra Rinse, Pre-Wash), Child Lock button, LED Display.

Program Selection: Turn knob to desired program (e.g., Cotton, Eco 40-60, Synthetics). Options: Select additional functions like Pre-Wash, Extra Rinse, or Reduced Crease. Temperature: Adjusted automatically per program; some allow manual change via +/- buttons. Spin Speed: Adjusted automatically; can be reduced or set to 'No Spin' via +/- buttons. Delay Timer: Press button and use +/- to set start delay (1-24 hrs). Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Cold water fill only (unless model has dual inlet). Standard drain hose.

1. Ensure water tap is off before connecting hoses.
2. Screw inlet hose(s) to machine first, then to tap. Hand-tighten only.
3. Secure drain hose in a standpipe (max height 100 cm) or over sink edge using the U-bend holder.
4. Check for leaks by turning on the tap before first wash.

Tip: Leave a small gap between the wall and machine for hose movement and ventilation.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not overload. Distribute items evenly.
2. Add detergent: Pour into main wash compartment (II) of the dispenser. Use pre-wash compartment (I) if selected.
3. Select program: Turn knob (e.g., "Cotton" for linens and towels).
4. Adjust settings: Use +/- for temperature or spin speed if needed.
5. Add options: Press button for Extra Rinse, Pre-Wash, etc.
6. Start: Press Start/Pause. The door locks and cycle begins. Time remaining shows on display.
7. At end: 'End' appears. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open the door during a wash cycle. The door is locked and hot water may be present.

Special Functions

Anti-Allergy Cycle: Uses higher temperatures and extended rinsing to reduce allergens. Quick Wash 15'/30': For lightly soiled, small loads. Delay Timer: Start wash at a later time. Child Lock: Locks control panel. Press and hold button for 3 sec. Reduced Crease: Reduces spin speed and adds a tumble period at the end to minimise wrinkles.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean detergent dispenser: Pull out drawer, rinse under warm water.
2. Clean door seal: Wipe rubber gasket to remove lint and residue. Leave door ajar after use to dry.
3. Clean filter: Locate behind the small hatch at bottom front. Place a towel, unscrew filter cap slowly to drain residual water, clean filter under tap.
4. Run maintenance wash: Monthly, run a 90°C cotton cycle with machine cleaner or bleach (no laundry).

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners or solvents.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2012/19/EU (WEEE). The symbol on the product or packaging indicates that this product must not be disposed of with other household waste. For proper treatment, recovery, and recycling, please take it to a designated collection point. For support, visit www.hotpoint.eu or contact your local Hotpoint service centre.

Troubleshooting

Reset: Unplug for 1 minute, then restart. For persistent errors, consult manual.

Service: Contact Hotpoint Customer Support or an authorised service agent. Keep model number ready.