Hotpoint washing machine RG 864 S UK manual

The Hotpoint RG 864 S is a freestanding 8kg capacity washing machine with 1400 RPM spin speed, featuring an A+++ energy rating, multiple wash programmes including Cotton, Synthetics, Delicates, Wool, and Quick Wash, delay start timer, child lock, and anti-flood protection. Designed for UK household use with 230-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent dispenser, drum light, filter access, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Capacity	8kg load capacity
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Programmes	15 programmes including Eco 40-60
Delay Start	Up to 24 hours
Child Lock	Prevents accidental programme changes
Anti-Flood Protection	AquaStop technology
Display	Digital with time remaining indicator
Door	Reversible for left/right opening
Quick Wash	30-minute programme for small loads

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust front feet clockwise/counter-clockwise; use spirit level.
Plug into grounded socket.

WARNING! Do not install in temperatures below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and run initial wash cycle.

Set programme: Turn dial to "Cotton 90°C" without laundry.
Add detergent: Pour 100ml detergent into compartment II.
Start: Press Start/Pause to begin; cycle runs for about 2 hours.
Check for leaks: Monitor hoses during first fill and drain.
Set preferences: Use Settings button for buzzer volume, etc.

CAUTION! First wash may contain residual water from factory testing.

Specifications

Model: RG 864 S UK
Capacity: 8kg (cotton)
Spin Speed: 1400 RPM (adjustable)
Dimensions (HxWxD): 85 x 60 x 60 cm
Energy Rating: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 litres per cycle (Eco 40-60)
Noise Level: 53 dB (washing), 73 dB (spinning)
Programmes: 15 including Cotton, Synthetics, Delicates, Wool, Sports, Quick Wash
Power Supply: 230-240V, 50Hz, 10A fuse

Controls and Settings

Control Panel: Rotary dial (select programme), Display (time, options), Start/Pause, Delay Start, Settings, Extra Rinse, Speed/Spin reduction.

Programme Dial: Cotton (20°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Quick Wash (30 min), Eco 40-60, Sports, Drum Clean, Spin Only, Rinse & Spin.

Settings Menu: Press Settings button to adjust buzzer volume (Off, Low, High), end-of-cycle buzzer, button lock (hold 3 sec). Display shows time remaining, cycle phase, and options selected.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Hose to standpipe (max height 100cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not overtighten.
Secure drain hose with clip; do not submerge in water.
Check for leaks after first connection.

Tip: Leave small gap between machine and wall for hose movement.

Using Wash Programmes

Select programme based on fabric type and soil level.

Load laundry: Do not exceed 8kg; distribute evenly.
Add detergent: Use compartments I (pre-wash), II (main wash), * (fabric softener).
Select programme: Turn dial; display shows default time/temp.
Adjust options: Press Extra Rinse, Speed Reduction, etc.
Delay Start: Press Delay button to set start time (1-24h).
Start: Press Start/Pause; door locks automatically.
Pause/Modify: Press Start/Pause to stop; wait 2 min for door unlock.
End of cycle: Buzzer sounds; door unlocks; remove laundry promptly.

WARNING! Do not open door during spin cycle. Unbalanced load may cause vibration.

Safety Features

Child Lock: Hold Settings button 3 sec to lock controls. Anti-Flood: AquaStop detects leaks and stops water. Door Lock: Automatically locks during cycle; unlocks at end or after pause. Overheating Protection: Thermal cut-out if motor overheats.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Pull out; rinse under tap; dry and reinsert.
Door seal: Wipe with damp cloth; remove debris from folds.
Filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter cap slowly; clean under running water; reinsert.
Drum clean: Run "Drum Clean" programme monthly without laundry.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

UKCA/CE marked; complies with UK safety and EMC regulations. Manufactured for UK market. Energy label according to EU Regulation 2019/2014. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug socket; ensure child lock off.
No water intake	Taps off/hose kinked	Open taps; straighten hoses; check water pressure.
Water doesn't drain	Drain blocked/filter	Clean filter; check drain hose for kinks/blockages.
Excessive vibration	Transit bolts/level	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes (E01-E10)	Fault detected	Refer to manual error code list; unplug for 5 min; restart.
Leaking water	Hose loose/seal	Tighten hose connections; check door seal for debris.

Reset: Unplug for 5 minutes; plug back in.

Service: 03448 113 113; www.hotpoint.co.uk