Hotpoint washing machine RDPD 96407 JD EU manual

The Hotpoint RDPD 96407 JD EU is a freestanding washing machine with a 9 kg load capacity, A+++ energy rating, and 1400 rpm spin speed. It features multiple wash programs, direct injection technology, anti-allergy cycle, delay timer, child lock, and self-cleaning detergent drawer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

FeatureDescription
Capacity9 kg maximum load
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 rpm
Direct InjectionPrecision water distribution for better wash
Anti-Allergy CycleEliminates 99.9% of allergens
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Self-Cleaning DrawerEasy maintenance of detergent compartment
Quick Wash30-minute cycle for lightly soiled items
Noise LevelLow noise operation (wash: 53 dB, spin: 75 dB)

Installation

Unpack and remove transit bolts. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
  3. Connect drain hose: Place in standpipe or sink; secure with U-bend.
  4. Level the machine: Adjust front feet for stability; check with spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run a maintenance wash before first use.

  1. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
  2. Set language: Press and hold START/PAUSE and OPTION buttons for 3 seconds to select language.
  3. Load detergent: Fill drawer compartments I (pre-wash), II (main wash), * (softener).
  4. Select program: Turn rotary selector to desired cycle.
  5. Start cycle: Press START/PAUSE.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Controls and Settings

Control Panel: Rotary program selector, LED display, temperature button, spin speed button, option buttons, START/PAUSE button.

Programs: Cotton, Synthetics, Delicates, Wool, Silk, Jeans, Sportswear, Anti-Allergy, Quick 30', Rinse+Spin, Drain.

Options: Extra Rinse, Pre-Wash, Delay Start, Speed Perfect (reduced time), Easy Iron (reduced spin).

Settings: Temperature (Cold to 90°C), Spin Speed (0 to 1400 rpm), Child Lock (press and hold START/PAUSE and OPTION for 3 seconds).

Connecting Water & Drain

Water Inlet: Cold water connection (and optional hot). Drain: Hose to standpipe or sink.

  1. Turn off water taps before connecting hoses.
  2. Connect inlet hoses: Screw onto taps; hand-tighten plus half turn with pliers.
  3. Position drain hose: Maximum height 100 cm; secure to prevent slipping.
  4. Check for leaks: Run a short rinse cycle and inspect connections.

Tip: Use new hoses; replace every 5 years. Do not kink hoses.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 9 kg; distribute evenly.
  2. Add detergent: Use drawer compartments; follow dosage instructions.
  3. Select program: Turn rotary selector (e.g., Cotton for cottons).
  4. Adjust settings: Press TEMP and SPIN to modify.
  5. Add options: Press OPTION buttons (e.g., Extra Rinse).
  6. Start: Press START/PAUSE; door locks automatically.
  7. End of cycle: Signal sounds; door unlocks after a few minutes.
  8. Remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash; wait for unlock signal. Check pockets for objects.

Special Functions

Delay Start: Set up to 24 hours. Child Lock: Locks controls. Self-Cleaning: Run empty at 90°C monthly. Anti-Allergy: High temperature cycle for sanitization.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run maintenance wash (90°C without laundry) every 30 cycles.

CAUTION! Do not use abrasive cleaners. Keep ventilation openings clear.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/child lockCheck plug; ensure child lock is off; close door properly.
No water intakeTaps/hoses/filterOpen taps; check hose for kinks; clean inlet filter.
Water does not drainDrain hose/filterCheck hose position; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; re-level machine; redistribute load.
Door will not openWater in drum/safety lockWait for unlock signal; run drain program.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu

Hotpoint washing machine RDPD 96407 JD EU manual © - All Rights Reserved 2025