Hotpoint washing machine RDG 9643 W UK N manual

The Hotpoint RDG 9643 W UK N is a freestanding washing machine with a 9 kg load capacity, featuring an A+++ energy rating, 1400 rpm spin speed, multiple wash programs including Eco 40-60, Quick Wash, and Delicates, direct injection technology, anti-allergy cycle, delay start, and child lock. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Wash Programs	15 programs including Cotton, Synthetics, Delicates
Direct Injection	Pre-mixes water and detergent for better cleaning
Anti-Allergy	Special cycle to reduce allergens
Delay Start	Timer up to 24 hours
Child Lock	Locks controls during operation
Quick Wash	30-minute cycle for small loads
Display	LED with time remaining and cycle indicators

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet; use spirit level to ensure balance.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine inlet valves.
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; run initial empty wash.

Set language: Press and hold Start/Pause for 3 seconds to select language (default English).
Load detergent: Add powder/liquid to appropriate drawer compartments.
Select first wash: Choose Cotton 90°C program without laundry to clean drum.
Start cycle: Press Start/Pause; machine will fill, heat, and drain.
Set child lock: If needed, press and hold Delay Start + Spin for 3 seconds.

CAUTION! Ensure hoses are securely connected to avoid leaks. Check for kinks in hoses.

Specifications

Model: RDG 9643 W UK N
Capacity: 9 kg (dry weight)
Energy Class: A+++
Spin Speed: 1400 rpm (adjustable)
Water Pressure: 0.5-10 bar
Programs: 15 including Eco 40-60, Wool, Sportswear, Rinse & Spin
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Max Power: 2100 W
Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: Rotary selector for programs, Start/Pause button, Delay Start, Spin Speed, Temperature, Extra Rinse, and Child Lock buttons.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics, Delicates). LED display shows duration and options.

Settings: Adjust temperature (cold to 90°C), spin speed (0-1400 rpm), delay start (1-24 hrs). Special options: Extra Rinse, Pre-wash, Rapid (for certain programs). Child Lock: Press Delay Start + Spin simultaneously for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to hot/cold taps (if machine supports dual inlet) or cold only. Drain: Place hose in standpipe (min 60 cm height) or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not overtighten.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Use drain hose extension if needed; avoid sharp bends.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by colour and fabric type.
Load machine: Do not exceed 9 kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Adjust settings: Set temperature, spin speed, extra options.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to stop; wait 2 minutes to open door if safe.
End of cycle: Signal sounds; remove laundry promptly to avoid wrinkles.

WARNING! Do not wash waterproof items (e.g., raincoats) to avoid drum imbalance.

Special Features

Eco 40-60: Energy-efficient wash for moderately soiled items at 40°C or 60°C. Anti-Allergy: Heats to 60°C to reduce dust mites and allergens. Quick Wash: 30-minute cycle for lightly soiled small loads. Delay Start: Set start time up to 24 hours ahead.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and drum. Run maintenance wash: Use Cotton 90°C program with drum cleaner or 100g soda crystals.

CAUTION! Unplug before cleaning. Wipe exterior with damp cloth; do not use abrasive cleaners.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 225 225 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is firmly shut; check plug is in socket and power is on.
No water intake	Taps off/hose kinked	Open taps fully; straighten hoses; check water pressure.
Leaking water	Loose connections	Tighten hose connections; check door seal for debris.
Excessive vibration/noise	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Poor washing results	Detergent/dosage	Use correct detergent type and amount; clean drawer; select proper program.
Display shows error code	Fault detected	Refer to manual error list (e.g., F01: drain issue, F02: water inlet fault).

Reset: Unplug for 5 minutes, then restart. If error persists, call support.

Service: 03448 225 225; www.hotpoint.co.uk