Hotpoint washing machine RDD 1175238 KD VJ EU manual

The Hotpoint RDD 1175238 KD VJ EU is a freestanding washing machine with a 7kg capacity, energy efficiency class A+++, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, direct spray system, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector and LED display, detergent dispenser, drum with stainless steel interior, water inlet/outlet hoses, adjustable feet, and filter access.

FeatureDescription
Capacity7kg dry laundry
Energy ClassA+++ (most efficient)
Spin SpeedUp to 1400 RPM
Anti-Stain TechnologyAutomatic stain removal for common stains
Direct Spray SystemSprays water directly onto clothes during wash
AquaStopLeak protection system
Delay StartUp to 24 hours
Quick Wash30-minute program for lightly soiled items
Child LockPrevents accidental program changes
Noise LevelWash: 53 dB; Spin: 75 dB

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level.
  3. Connect water inlet: Attach inlet hose to cold water tap (3/4" thread).
  4. Connect drain hose: Place in standpipe or sink (max height 100cm).
  5. Plug into grounded socket (220-240V, 50Hz).

WARNING! Do not install in wet areas. Ensure transit bolts removed to prevent damage.

First-Time Setup

Before first wash, run empty cycle.

  1. Connect power and water supply.
  2. Open detergent dispenser; add 1/2 cup of bleach to compartment II.
  3. Select "Cotton" program at 90°C.
  4. Press Start/Pause to begin empty cleaning cycle.
  5. After completion, machine is ready for use.

CAUTION! Ensure all packaging removed. Check for water leaks after first connection.

Specifications

Controls and Settings

Control Panel: Rotary selector for programs, LED display, temperature button, spin speed button, option buttons.

Buttons: Start/Pause, Delay Start, Extra Rinse, Pre-Wash, Child Lock, Anti-Stain.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, Wool, etc.). Temperature: Press TEMP to select (Cold, 30°C, 40°C, 60°C, 90°C). Spin Speed: Press SPIN to select (0, 400, 600, 800, 1000, 1200, 1400 RPM). Options: Extra Rinse (adds rinse cycle), Pre-Wash (for heavily soiled), Delay Start (1-24 hours). Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate.

Connecting Utilities

Water: Cold fill only. Drain: Standpipe or sink. Power: Grounded socket.

  1. Ensure water tap is off before connecting hose.
  2. Connect inlet hose to machine first, then to tap.
  3. Secure drain hose to standpipe (do not immerse in water).
  4. Plug power cord directly into wall socket (no extension).

Tip: Check hose connections for leaks before first use.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Open dispenser; add to compartments I (pre-wash), II (main wash), * (fabric softener).
  3. Select program: Turn knob (e.g., Cotton for cotton items).
  4. Adjust settings: Temperature, spin speed, options as needed.
  5. Start: Press Start/Pause; door locks automatically.
  6. End: Machine beeps; door unlocks after 2 minutes.
  7. Remove laundry promptly to prevent wrinkles.

WARNING! Do not overload. Remove coins/objects from pockets.

Special Functions

Anti-Stain: Press button before start; machine selects optimal settings for stains. Delay Start: Set 1-24 hours delay. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled items.

Care & Cleaning

Monthly maintenance recommended.

  1. Clean detergent dispenser: Remove and rinse under water.
  2. Clean filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean; reinsert.
  3. Clean drum: Run empty hot wash (90°C) with washing machine cleaner.
  4. Wipe exterior with damp cloth; dry immediately.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives. Energy label: A+++. Waste electrical products must not be disposed with household waste. Contact local authority for recycling. For support, visit www.hotpoint.eu or contact Hotpoint Customer Care: UK 03448 113 113, Ireland 0818 313 413.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check power socket; press Start/Pause.
No water intakeTap off/hose kinkedOpen water tap; check hose for kinks; clean inlet filter.
Water not drainingDrain hose blockedCheck drain hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet to level machine.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes; retry.

Reset: Unplug for 5 minutes; plug back in.

Service: UK 03448 113 113; Ireland 0818 313 413; www.hotpoint.eu

Hotpoint washing machine RDD 1175238 KD VJ EU manual © - All Rights Reserved 2025