Hotpoint washing machine RD 966 JKD UK manual

The Hotpoint RD 966 JKD is a freestanding washing machine with a 9kg capacity, 1600 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a delay timer, child lock, and AquaStop leak protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum, electronic control panel, detergent dispenser, water inlet hoses, drain hose, adjustable feet, and AquaStop system.

Feature	Description
Capacity	9kg (cotton)
Spin Speed	Up to 1600 RPM
Energy Rating	A+++
Programs	15+ including Cotton, Synthetic, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system
Display	LED with time remaining indicators
Door	Reversible (opens left/right)
Dimensions (HxWxD)	850 x 600 x 600 mm

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach blue hose to cold water tap; red hose to hot (if used).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Plug into grounded 13A socket.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and run a maintenance wash.

Power on: Press POWER button.
Run initial wash: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use CONTROL knob to select language (default ENGLISH).
Test functions: Check spin, drain, and door lock.

CAUTION! Ensure machine is level to prevent vibration. Check all hose connections for leaks.

Specifications

Model: RD 966 JKD
Capacity: 9kg
Spin Speed: 1600 RPM (adjustable)
Energy Class: A+++
Water Consumption: ~50 litres per cycle (cotton 60°C)
Programs: Cotton, Eco Cotton, Synthetic, Delicates, Wool, Quick Wash (14'), Sport, Jeans, Anti-Allergy, Drum Clean
Noise Level: 74 dB (wash), 79 dB (spin)
Power Supply: 220-240V, 50Hz, 10A
Weight: 72 kg
Warranty: 2 years parts and labour

Controls and Settings

Control Panel: POWER button, PROGRAM knob, OPTION buttons (Delay, Extra Rinse, Pre-Wash), START/PAUSE, RAPID button.

Display: Shows program time, options, delay time, and error codes.

Program Selection: Turn knob to desired program (e.g., Cotton 40°C). Options: Press to activate Delay (1-24h), Extra Rinse, Pre-Wash. Temperature: Auto-selected per program; adjust with TEMP button if available. Spin Speed: Adjust with SPIN button (400-1600 RPM or Rinse Hold). Start/Pause: Press to begin; press again to pause (door locks during wash). Child Lock: Press and hold DELAY + RAPID for 3 seconds to enable/disable.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Use supplied washers. Drain: Place hose in standpipe (Ø min 4cm) or over sink edge.

Ensure taps are off before connecting hoses.
Secure hose ends; do not overtighten.
Check for leaks by turning taps on slowly.
Ensure drain hose is not kinked and is secure.

Tip: Use AquaStop connector for additional leak protection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pour into dispenser drawer (main wash, pre-wash, softener).
Select program: Turn knob (e.g., Synthetic 40°C).
Set options: Press Extra Rinse, Delay, etc.
Start: Press START/PAUSE; door locks and cycle begins.
After wash: Wait for door unlock signal; remove laundry promptly.
Drum Clean: Run monthly with detergent to prevent mould.

WARNING! Do not open door during wash; wait for unlock indicator. Remove all objects from pockets.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash. AquaStop: Cuts water supply if leak detected. Imbalance Control: Reduces spin speed if load is uneven. Overheat Protection: Prevents motor overheating.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass to remove lint. Run Drum Clean program monthly at 90°C.

CAUTION! Do not use abrasive cleaners or solvents. Keep ventilation openings clear.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 226 226.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power, door, child lock	Check plug socket; ensure door closed; disable child lock.
No water intake	Taps, hoses, filter	Open taps; check hose kinks; clean inlet filter.
Water doesn't drain	Drain hose, pump filter	Check hose height/blockage; clean pump filter.
Excessive vibration	Transit bolts, level, load	Ensure bolts removed; level machine; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, retry.
Leaking	Hoses, door seal	Tighten connections; check seal for debris; ensure detergent drawer closed.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 226 226; www.hotpoint.co.uk