Hotpoint washing machine RD 966 JGD UK manual

The Hotpoint RD 966 JGD UK is a freestanding washing machine with a 9kg capacity, 1600 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum, digital control panel, detergent drawer, water inlet hoses, drain hose, adjustable feet, and filter access.

FeatureDescription
Capacity9kg laundry load
Spin SpeedUp to 1600 RPM
Energy RatingA+++ (most efficient)
DisplayDigital LED with time remaining
ProgramsCotton, Synthetics, Delicates, Quick Wash, etc.
Delay StartUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodAquaStop protection system
DoorReversible for left/right opening
Noise LevelLow noise operation (approx. 74 dB)

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Position machine: Ensure at least 1cm clearance on sides and back.
  2. Adjust feet: Use spanner to level machine; check with spirit level.
  3. Connect water supply: Attach inlet hoses to cold water tap (blue mark) and hot if needed (red mark).
  4. Connect drain hose: Place in standpipe or sink (max height 100cm).
  5. Plug into grounded 3-pin socket.

WARNING! Remove all transit bolts before use to prevent damage. Do not use extension cords.

First-Time Setup

Plug in and run initial empty wash.

  1. Remove transit bolts: Use spanner to remove bolts at rear; fit caps provided.
  2. Connect hoses: Ensure tight connections; check for leaks.
  3. Level machine: Adjust feet until stable.
  4. Run test cycle: Select Cotton 90°C program without laundry to clean drum.
  5. Set preferences: Use control dial to select language (default ENGLISH).

CAUTION! Ensure water taps are fully open before starting wash.

Specifications

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (Delay, Spin Speed, Temperature), Display.

Program Dial: Select from Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash (30 mins), Wool, Hand Wash, Drum Clean.

Options: Adjust temperature (cold to 90°C), spin speed (400-1600 RPM or no spin), delay start (1-24 hrs). Display shows time remaining, cycle stage, and error codes. Child Lock: Press and hold Delay + Spin Speed for 3 seconds. Anti-Crease: Keeps clothes moving after cycle ends.

Connecting Water & Drain

Water Inlet: Two hoses (blue for cold, red for hot). Drain: Hose to standpipe or sink.

  1. Turn off taps before connecting hoses.
  2. Connect hoses: Screw onto taps; hand-tighten plus quarter turn with pliers.
  3. Secure drain hose: Use hook provided; ensure no kinks.
  4. Check for leaks: Run short rinse cycle and inspect connections.

Tip: Use only genuine Hotpoint hoses; replace every 5 years.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Do not exceed 9kg; distribute evenly.
  2. Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: fabric softener).
  3. Select program: Turn dial to desired program (e.g., Cotton for towels).
  4. Adjust options: Set temperature, spin speed, delay if needed.
  5. Start: Press Start/Pause; door locks automatically.
  6. Pause/change: Press Start/Pause to pause; turn dial to change program (if door unlocked).
  7. End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during spin cycle. Remove items promptly to avoid creasing.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash. Anti-Flood: AquaStop detects leaks and shuts off water. Overheat Protection: Prevents motor overheating. Imbalance Control: Reduces spin speed if load uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean filter: Turn off taps, place towel below, open filter cover, drain residual water, remove debris. Run Drum Clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners. Keep filter area clear.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste; recycle at local facility. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug socket; ensure child lock off.
No water intakeTaps off/hoses blockedOpen taps fully; check hose for kinks; clean inlet filter.
Water doesn't drainDrain blocked/pump filterCheck drain hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/uneven loadEnsure transit bolts removed; redistribute laundry; level feet.
Error code F05Door lock faultUnplug for 5 minutes; restart. If persists, call service.

Reset: Unplug for 2 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine RD 966 JGD UK manual © - All Rights Reserved 2025