Hotpoint washing machine RD 966 JD UK N manual

The Hotpoint RD 966 JD UK N is a freestanding washing machine with a 9kg load capacity, 1600 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

FeatureDescription
Capacity9kg drum for large loads
Spin SpeedUp to 1600 RPM for efficient drying
Energy RatingA+++ for low energy consumption
ProgramsMultiple wash programs including Cotton, Synthetic, Delicates, Quick Wash
Digital DisplayShows time remaining, cycle stage, and settings
Delay StartSet wash to start later (up to 24 hours)
Child LockPrevents accidental program changes
Anti-Flood ProtectionLeak detection system
Adjustable FeetFor leveling on uneven floors
Detergent DrawerCompartments for pre-wash, main wash, and fabric softener

Installation

Unpack and inspect contents. Place on stable, level floor near water and drain points.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  4. Level the machine: Adjust feet using wrench; ensure machine is stable.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial setup cycle.

  1. Check connections: Ensure hoses are secure and no leaks.
  2. Select language: On display, set to ENGLISH (default).
  3. Run cleaning cycle: Use drum clean program without laundry to remove residues.
  4. Load detergent: Fill drawer compartments as needed.
  5. Choose program: Select appropriate wash for first load.

CAUTION! Do not overload drum. Use recommended detergent amounts.

Specifications

Controls and Settings

Access settings via control knob and buttons. Display shows program details.

Control Panel: Program knob, START/PAUSE button, OPTIONS button (for temperature, spin speed, extra rinse), DELAY START button, CHILD LOCK button.

Programs: Select with knob (e.g., Cotton 40°C). Options: Adjust temperature (cold-90°C), spin speed (400-1600 RPM), extra rinse, pre-wash. Delay Start: Set 1-24 hours. Child Lock: Press and hold for 3 seconds to enable/disable. Display: Shows time remaining, cycle stage, and selected options.

Connecting Water & Drain

Water Inlet: Connect hoses to taps and machine (blue for cold, red for hot if dual supply). Drain: Place hose in standpipe (max height 100cm) or sink.

  1. Turn off taps before connecting hoses.
  2. Use only provided hoses; do not overtighten.
  3. Ensure drain hose is not kinked or submerged.
  4. Check for leaks after first use.

Tip: Install a drip tray if machine is on wooden floors.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Sort laundry: Separate by color and fabric type.
  2. Load drum: Do not exceed 9kg; distribute evenly.
  3. Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: fabric softener).
  4. Select program: Turn knob (e.g., Synthetic for synthetics).
  5. Adjust options: Press OPTIONS to change temperature, spin speed, etc.
  6. Start: Press START/PAUSE; display shows time remaining.
  7. Pause/stop: Press START/PAUSE to pause; turn knob to OFF to cancel.
  8. Unload: Remove laundry promptly after cycle ends; leave door ajar to dry drum.

WARNING! Do not wash items soaked in solvents or flammable liquids. Remove coins/objects from pockets.

Special Features

Delay Start: Set wash to begin later (press DELAY START, use arrows to set hours). Child Lock: Prevents changes during cycle (press and hold CHILD LOCK 3 seconds). Anti-Flood: Automatically stops water if leak detected. Drum Clean: Run monthly without laundry to maintain hygiene.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean program regularly.

CAUTION! Do not use abrasive cleaners or hose down machine. Clean filter periodically to prevent blockages.

Regulatory Information

Complies with UK/EU safety and energy standards (CE marked). Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lockCheck plug and power; ensure child lock is off; close door properly.
No water intakeTaps/hoses/filterEnsure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/filterCheck hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet to level machine.
Error codes on displayVarious faultsRefer to manual code list; unplug for 5 minutes, then retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine RD 966 JD UK N manual © - All Rights Reserved 2025