Hotpoint washing machine RD 966 JD UK manual

The Hotpoint RD 966 JD is a freestanding washing machine with a 9kg capacity, 1600 RPM spin speed, and energy rating A+++. It features multiple wash programs, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, detergent drawer, drum, door, water inlet hoses, drain hose, adjustable feet.

FeatureDescription
Capacity9kg load capacity
Spin SpeedUp to 1600 RPM
Energy RatingA+++
Programs15 wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay StartUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodAquaStop protection
DisplayLED digital display with time remaining
DoorReversible for left/right opening
Dimensions850mm H x 600mm W x 600mm D

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure with U-bend.
  4. Level machine: Adjust feet using spanner; use spirit level.
  5. Plug into grounded socket (220-240V, 13A).

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash.

  1. Set language: Press SETTINGS button to select ENGLISH (default).
  2. Load detergent: Fill drawer compartments as per instructions.
  3. Select program: Turn dial to "Cotton 60°C".
  4. Start cycle: Press START/PAUSE; let complete to remove residues.
  5. Set child lock: Hold CHILD LOCK button for 3 seconds if needed.

CAUTION! Ensure transit bolts removed; improper removal can damage machine.

Specifications

Controls and Settings

Control Panel: Program dial, display, START/PAUSE, OPTIONS, CHILD LOCK, SETTINGS.

Program Dial: Select from Cotton, Synthetics, Delicates, Quick Wash (30°C), Eco 40-60, Wool, Hand Wash, Sportswear, Anti-Allergy, Rinse+Spin, Drain, Drum Clean.

Options: Extra Rinse, Pre-Wash, Delay Start (1-24h), Speed Wash, Low Temp. Settings: Child Lock (hold 3 sec), Sound On/Off, End of Cycle Beep. Display: Shows time remaining, cycle stage, options selected.

Connecting Water & Drain

Water Inlet: Cold fill only (blue hose). Drain: Hose to standpipe or sink.

  1. Turn off water tap before connecting hoses.
  2. Connect inlet hose to machine and tap; hand-tighten.
  3. Place drain hose in standpipe (max height 100cm) or over sink edge.
  4. Secure hose to prevent slipping.
  5. Check for leaks after first run.

Tip: Use hose clips if provided; ensure no kinks in hoses.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 9kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
  3. Select program: Turn dial to desired program.
  4. Set options: Press OPTIONS for Extra Rinse, Delay Start, etc.
  5. Start: Press START/PAUSE; display shows time remaining.
  6. Pause: Press START/PAUSE to stop; door locks during wash.
  7. End of cycle: Beep sounds; door unlocks after 2 minutes.
  8. Drum Clean: Run monthly with detergent to prevent mould.

WARNING! Do not open door during wash; wait for unlock. Remove items promptly after cycle.

Safety Features

Child Lock: Prevents program changes; hold button 3 sec to activate/deactivate. Anti-Flood: AquaStop detects leaks and stops water. Door Lock: Auto-locks during wash; unlocks after cycle end or power failure. Overload Protection: Reduces spin speed if load unbalanced.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016, WEEE Regulations 2013. Energy label according to EU 2019/2014. Manufactured for UK market. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug socket; ensure door closed properly; press START/PAUSE.
No water intakeTaps/hosesEnsure taps on; check hose for kinks; clean inlet filter.
Water not drainingDrain hoseCheck for blockages; ensure hose not too high (max 100cm).
Excessive vibrationTransit bolts/levelEnsure transit bolts removed; adjust feet for level floor.
Error codes (E01-E10)Fault detectedRefer to manual; common: E01 (door issue), E02 (drain problem).
Detergent not dispensingDrawer blockedClean drawer compartments; use correct detergent type.

Reset: Unplug for 5 minutes; plug back in.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine RD 966 JD UK manual © - All Rights Reserved 2025