Hotpoint washing machine RD 1176 JD UK manual

The Hotpoint RD 1176 JD is a freestanding 7kg capacity washing machine with 1200 RPM spin speed, featuring multiple wash programmes, energy efficiency class A, delay timer, child lock, and fast wash options. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and door lock.

Feature	Description
Capacity	7kg (dry laundry weight)
Spin Speed	Up to 1200 RPM
Energy Rating	A (energy efficient)
Programmes	Cotton, Synthetics, Delicates, Wool, Fast Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental programme changes
Door Lock	Automatic during cycle
Display	LED indicators and time remaining
Detergent Dispenser	For powder/liquid detergent and fabric softener
Adjustable Feet	For levelling the machine

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into grounded socket (220-240V, 50Hz).

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press POWER button.
Run initial cycle: Select Cotton programme at 90°C without laundry.
Set preferences: Use control dial and buttons to set default options (e.g., spin speed, temperature).
Test child lock: Press and hold relevant buttons to activate/deactivate.

CAUTION! Ensure transit bolts are removed before use to prevent damage.

Specifications

Model: RD 1176 JD
Capacity: 7kg
Spin Speed: 1200 RPM (adjustable)
Dimensions (HxWxD): 85cm x 60cm x 60cm (approx)
Water Pressure: 0.5 - 10 bar
Programmes: 15+ including Cotton, Synthetics, Delicates, Wool, Fast Wash (30°C), Eco 40-60, Rinse & Spin, Drain
Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
Water Consumption: 45 litres per cycle (Cotton 60°C)
Noise Level: 53 dB (washing), 73 dB (spinning)
Power Supply: 220-240V, 50Hz, 10A fuse

Controls and Settings

Control Panel: POWER button, programme dial, START/PAUSE, OPTION buttons (e.g., temperature, spin speed, delay), child lock indicator.

Programme Dial: Select desired wash programme (Cotton, Synthetics, Delicates, Wool, Fast Wash, etc.).

Options: Adjust temperature (cold to 90°C), spin speed (0 to 1200 RPM), delay timer (1-24 hrs), extra rinse, pre-wash.

Display: Shows time remaining, selected options, and error codes.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (and hot) water taps using supplied fittings. Drain: Place hose in standpipe (min 60cm height) or sink.

Turn off water taps before connecting hoses.
Ensure inlet hose filters are clean.
Secure drain hose to avoid movement during spin.
Check for leaks after first connection.

Tip: Use hose clips if drain hose does not fit securely in standpipe.

Using Wash Programmes

Supports various fabrics and soil levels.

Load laundry: Open door, load up to 7kg, close securely.
Add detergent: Pour into correct dispenser compartment (I for pre-wash, II for main wash, * for softener).
Select programme: Turn dial to desired programme (e.g., Cotton for cottons).
Adjust options: Press temperature, spin speed, delay, etc., as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/stop: Press START/PAUSE to pause; turn dial to reset to stop.
End of cycle: Signal sounds; door unlocks after a short delay.

WARNING! Do not open door during cycle; wait until unlocked. Overloading may reduce wash performance.

Safety Features

Child Lock: Prevents accidental programme changes; activate by pressing specific buttons. Door Lock: Automatically locks during wash; unlocks at end. Overflow Protection: Automatically stops water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run maintenance cycle (90°C Cotton without laundry) every 30 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016 and WEEE regulations. Energy label according to EU regulations. Copyright © Hotpoint. For support, visit www.hotpoint.co.uk or contact 03448 226 226 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power/door	Check plug is in; ensure door is closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure taps are on; check hoses for kinks; clean inlet filters.
Water not draining	Drain hose/pump	Check hose for blockages; clean pump filter (see manual).
Excessive vibration	Transit bolts/levelling	Ensure transit bolts removed; adjust feet to level machine; redistribute load.
Error code displayed	Various faults	Refer to error code list in manual; reset by turning off/on.

Reset: Turn programme dial to reset or unplug for 1 minute.

Service: 03448 226 226 (UK); www.hotpoint.co.uk