Hotpoint washing machine NWBT 1045 WDAD IT N manual

The Hotpoint NWBT 1045 WDAD IT N is a 10 kg capacity front-loading washing machine with energy class A+++, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, child lock, anti-crease function, and is designed for built-in or freestanding installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Digital Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Adjustable Feet, Power Cord.

Feature	Description
Capacity	10 kg maximum load
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Display	Digital LED with time remaining
Programs	15 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Locks control panel during operation
Anti-Crease	Reduces wrinkles at end of cycle
Door Lock	Automatic safety lock during wash
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts. Place on solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; ensure no kinks.
Level the machine: Adjust feet using wrench; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in and run initial empty wash.

Power on: Press POWER button; display lights up.
Select first wash: Choose "Cotton 90°C" program without laundry.
Add detergent: Pour 100 ml of detergent into drawer II (main wash).
Start: Press START/PAUSE; let complete cycle to clean drum.
Set preferences: Use SETTINGS button to adjust buzzer volume, etc.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: NWBT 1045 WDAD IT N
Capacity: 10 kg (dry weight)
Dimensions (HxWxD): 85 x 60 x 60 cm
Energy Rating: A+++
Annual Consumption: 175 kWh
Water Consumption: 10,000 liters per year
Spin Speed: 1400 RPM (adjustable)
Programs: 15 including Eco 40-60, Wool, Sport, Drum Clean
Noise Level: Wash: 53 dB; Spin: 75 dB
Power Supply: 220-240V, 50Hz, 10A

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR KNOB, START/PAUSE, OPTION BUTTONS (Delay, Extra Rinse, etc.), DISPLAY.

Programs: Cotton (40°C-90°C), Synthetic, Delicate, Wool, Quick Wash (30 min), Eco 40-60, Sport, Drum Clean, Rinse & Spin, Spin Only, Drain.

Options: Delay Start (1-24h), Extra Rinse, Pre-Wash, Anti-Crease, Reduced Crease, Speed Perfect (faster wash). Settings: Buzzer volume (High/Low/Off), Child Lock (press 3 sec), Reset (hold START 5 sec).

Connecting Water & Drain

Water Inlet: Two hoses (blue=cold, red=hot). Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect hoses to machine (L=hot, R=cold) and tighten.
Place drain hose in standpipe (max height 100 cm) or over sink edge.
Secure with provided hook.

Tip: Use only provided hoses; replace every 5 years. Ensure drain hose is not submerged.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 10 kg; distribute evenly.
Add detergent: Use drawer I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob to desired program (e.g., Cotton 40°C).
Select options: Press Extra Rinse, Delay, etc. as needed.
Start: Press START/PAUSE; door locks and cycle begins.
Pause/change: Press START/PAUSE to stop; wait 2 min to open door.
End of cycle: Buzzer sounds; door unlocks after short delay.

WARNING! Do not open door during high-temperature washes; hot water may cause burns.

Special Functions

Child Lock: Press and hold CHILD LOCK button 3 sec to activate/deactivate. Delay Start: Set 1-24 hours delay. Drum Clean: Run monthly without laundry at 90°C. Anti-Crease: Tumbles intermittently after cycle end.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass to remove lint. Run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners or solvents on surfaces.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center. Disposal: Comply with WEEE directive; do not dispose with household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock/door	Check plug; ensure child lock off; close door firmly.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water does not drain	Drain hose/pump filter	Check hose for kinks; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling/load	Ensure transit bolts removed; relevel; redistribute load.
Error codes on display	Various faults	Refer to manual error code list (e.g., F01 = water intake fault).

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu/support