Hotpoint Washing Machine NSWR 943C Manual

The Hotpoint NSWR 943C is a 9kg capacity front-loading washing machine with 1400 RPM spin speed, featuring AquaCare technology for gentle fabric care, Direct Spray pre-wash, Anti-Allergy cycle, Quick Wash programs, delay timer up to 24 hours, child lock, and energy efficiency class A+++. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and door lock mechanism.

Feature	Description
Capacity	9kg laundry load
Spin Speed	Up to 1400 RPM
AquaCare Technology	Gentle washing with reduced water temperature
Direct Spray	Pre-wash system for better stain removal
Anti-Allergy Cycle	Eliminates 99.9% of allergens
Quick Wash	30-minute program for lightly soiled items
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Energy Class	A+++ (most efficient)
Noise Level	53 dB (washing), 73 dB (spinning)

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn clockwise/anti-clockwise to level machine; use spirit level.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash cycle.

Check water connections: Turn on taps; ensure no leaks.
Add detergent: Pour 100ml of liquid detergent into drawer II for cleaning cycle.
Select program: Turn dial to "Cotton 90°C" without laundry.
Start cycle: Press START/PAUSE; let complete to clean drum.
Set preferences: Use SETTINGS button for buzzer volume, etc.

CAUTION! First wash may contain residual water from factory testing.

Specifications

Model: NSWR 943C
Capacity: 9kg (cotton)
Spin Speed: 1400 RPM (adjustable)
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230-240V, 50Hz, 10A
Programs: 16 including Cotton, Synthetic, Delicate, Wool, Quick Wash, Anti-Allergy
Energy Consumption: 150 kWh/year
Water Consumption: 9000 litres/year
Weight: 70kg

Controls and Settings

Control Panel: Program dial, digital display, temperature button, spin speed button, option buttons (Pre-wash, Extra Rinse, Delay Start), START/PAUSE button.

Program Selection: Turn dial to desired program (Cotton, Synthetic, Delicates, Wool, etc.).

Temperature: Press TEMP button to select 20°C-90°C or cold. Spin Speed: Press SPIN button to select 400-1400 RPM or no spin. Options: Pre-wash for heavily soiled, Extra Rinse for sensitive skin, Delay Start (1-24h). Settings Menu: Press SETTINGS for buzzer volume (Off/Low/High), child lock activation.

Connecting Water Supply

Hot & cold fill: Connect hoses to corresponding taps. Drain: Secure hose to standpipe (max height 100cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Check inlet filters are clean; clean if blocked.
After connections, open taps fully and check for leaks.

Tip: Install drain hose properly to avoid siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9kg; distribute evenly.
Add detergent: Use drawer I for pre-wash, II for main wash, * for softener.
Select program: Turn dial (e.g., Cotton for towels/bed linen).
Adjust settings: Temperature, spin speed, options as needed.
Start: Press START/PAUSE; display shows remaining time.
Pause/change: Press START/PAUSE to stop; wait 2 minutes to open door.
End of cycle: Buzzer sounds; remove laundry promptly.

WARNING! Do not wash waterproof items (raincoats, cushions) to avoid imbalance.

Special Functions

Anti-Allergy Cycle: Uses higher temperature and extra rinses to remove allergens. Quick Wash: 30-minute cycle for 2kg lightly soiled cotton. Delay Start: Set 1-24 hours delay; machine starts automatically. Child Lock: Press and hold SETTINGS for 3 seconds to lock controls.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, drum, and filter.

Detergent drawer: Pull out; wash under running water.
Door seal: Wipe with damp cloth; remove debris.
Drum: Run "Drum Clean" program at 90°C without laundry.
Filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label: A+++. Waste disposal: Do not dispose with household waste; contact local authority for recycling. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses not kinked; clean inlet filters.
Water doesn't drain	Drain hose/filter	Check hose not blocked/too low; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Error codes (E01-E10)	Various faults	Consult manual; common: E01=door open, E02=drain problem.
Detergent not dispensing	Drawer blocked	Clean drawer compartments; use correct detergent type.

Reset: Unplug for 5 minutes; plug back in.

Service: 0344 822 4224; www.hotpoint.eu