Hotpoint washing machine NSWR 845C WK UK N manual

The Hotpoint NSWR 845C WK UK N is a freestanding washing machine with an 8kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, electronic controls, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, filter, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Capacity	8kg load capacity
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ for energy efficiency
Programs	Multiple wash programs (Cotton, Synthetic, Delicates, etc.)
Delay Start	Timer for delayed cycle start
Child Lock	Prevents accidental program changes
Digital Display	Shows time, cycle stage, and settings
Anti-Flood Protection	Leak detection system
Detergent Dispenser	Compartments for detergent, softener, pre-wash
Adjustable Feet	For leveling the machine

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Level the machine: Adjust feet using wrench; ensure machine is stable.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Remove packaging: Ensure all internal packaging is removed from drum.
Connect power and water: Turn on water tap and plug in machine.
Run empty wash: Select Cotton program at 90°C without laundry.
Set preferences: Use control dial and buttons to set language, time, etc.
Load detergent: Fill dispenser as per detergent instructions.

CAUTION! Do not use machine without removing transit bolts. Ensure drain hose is not kinked.

Specifications

Model: NSWR 845C WK UK N
Capacity: 8kg
Spin Speed: 1400 RPM
Energy Rating: A+++
Water Pressure: 0.5 - 8 bar
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): 85 x 60 x 60 cm (approx.)
Programs: Cotton, Synthetic, Delicates, Wool, Quick Wash, etc.
Noise Level: Wash: 53 dB, Spin: 73 dB
Weight: 70kg (approx.)

Controls and Settings

Control Panel: Program dial, Start/Pause button, Delay Start button, Option buttons (e.g., Extra Rinse, Pre-wash), Child Lock button, Digital display.

Program Dial: Select wash programs (Cotton, Synthetic, Delicates, Wool, Quick Wash, etc.). Options: Adjust temperature, spin speed, extra functions. Display: Shows time remaining, cycle stage, selected options. Child Lock: Press and hold for 3 seconds to activate/deactivate. Delay Start: Set delay up to 24 hours.

Connecting Water & Drain

Water Inlet: Connect hoses to cold water tap (and hot if machine supports). Drain: Place hose in standpipe or sink.

Ensure water taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Secure drain hose at correct height (60-100 cm from floor).
Check for leaks after connections.

Tip: Use hose clips if provided. Do not extend drain hose beyond 1.5m.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use dispenser compartments (main wash, pre-wash, softener).
Select program: Turn dial to desired program.
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press Start/Pause; machine will fill, wash, rinse, spin.
After cycle: Remove laundry promptly; leave door open to dry drum.

WARNING! Do not wash items contaminated with flammable substances. Check pockets for objects.

Special Functions

Delay Start: Set timer for delayed start. Child Lock: Prevents changes during cycle. Extra Rinse: Adds rinse cycle. Pre-wash: For heavily soiled loads. Reduced Creases: For fewer wrinkles. Quick Wash: For lightly soiled loads (30°C).

Care & Cleaning

Regular maintenance ensures performance.

Clean detergent dispenser: Remove monthly; wash under tap.
Clean filter: Locate at front bottom; turn counterclockwise to remove; clear debris.
Clean drum: Run maintenance wash (90°C) monthly without laundry.
Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam cleaners.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Waste disposal: Dispose of packaging and old machine according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 247 365.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock	Check plug; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Leaking water	Hoses/connections	Tighten connections; check hoses for damage.
Unusual noise	Foreign objects	Check for coins, buttons in drum or filter.
Error codes on display	Various faults	Consult manual for specific code; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 247 365; www.hotpoint.co.uk