Hotpoint washing machine NSWR 845C GK UK N manual

The Hotpoint NSWR 845C GK UK N is a freestanding washing machine with an 8kg load capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, electronic controls, a delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, water inlet/outlet hoses, adjustable feet, and power cord.

Feature	Description
Capacity	8kg laundry load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Programs	Multiple including Cotton, Synthetic, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Automatic water shut-off if leak detected
Display	LED digital display with time remaining
Door	Reversible for left/right opening
Dimensions (HxWxD)	850 x 600 x 540 mm

Installation

Unpack and inspect contents. Place on a level, stable floor.

Remove transit bolts: Use spanner to remove bolts from rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water inlet: Attach cold water hose to tap; ensure washers are fitted.
Connect drain hose: Place in standpipe or hook over sink edge (max height 100cm).
Plug into grounded power socket.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washing machine; run a maintenance wash before first use.

Remove any packaging from inside the drum.
Connect water and power, then turn on tap fully.
Select the "Cotton 90°C" program without laundry and run a full cycle to clean the drum.
Set language if applicable via control dial/press (default is English).
Familiarize yourself with the control panel and program options.

CAUTION! Ensure the machine is level to prevent excessive vibration during spin cycles.

Specifications

Model: NSWR 845C GK UK N
Type: Freestanding Front Loader
Capacity: 8 kg
Max Spin Speed: 1400 RPM
Energy Class: A+++
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V ~ 50Hz
Programs: 15+ including Eco, Daily, Sport, Wool, Silk
Noise Level (wash/spin): 53/76 dB(A)
Weight: Approx. 70 kg

Controls and Settings

Access functions via the rotary dial and button panel. Display shows time, temperature, and options.

Main Controls: POWER ON/OFF, Rotary Program Selector, START/PAUSE, Delay Timer, Spin Speed Reduction, Temperature Selection, Extra Rinse, Pre-Wash.

Settings: Adjust spin speed (400-1400 RPM or No Spin), temperature (Cold to 90°C), and options like Extra Rinse. Child Lock: Press and hold specific buttons for 3 seconds. Delay Timer: Set start time up to 24 hours in advance.

Connecting Utilities

Water: Cold fill only. Drain: To standpipe or sink. Power: Standard UK 3-pin socket.

Turn off water and power before connecting.
Connect inlet hose to cold water tap (do not use old hoses).
Secure drain hose to waste pipe (do not immerse in water).
Plug directly into wall socket; avoid extension cords.

Tip: Check for leaks at connections after first run. Ensure drain hose is not kinked.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 8kg; distribute evenly.
Add detergent: Pour into correct dispenser compartment (I, II, *).
Select program: Turn dial (e.g., Cotton, Synthetic, Delicates).
Adjust settings: Optional temperature, spin speed, extra options.
Start: Press START/PAUSE; door locks and cycle begins.
Pause/Stop: Press START/PAUSE to pause; turn dial to reset to stop.
End of cycle: Signal sounds; door unlocks after a short delay.
Unload promptly to avoid creasing.

WARNING! Do not open door during high-temperature washes; steam may cause burns. Check pockets for objects.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatic during wash. Anti-Flood: Shuts off water if leak detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Regular maintenance ensures performance and longevity.

Clean detergent dispenser: Remove monthly and rinse under tap.
Clean door seal: Wipe rubber gasket to remove lint and residue.
Run maintenance wash: Monthly, use a washing machine cleaner or hot cotton cycle without laundry.
Clean filter: Locate at front bottom; place towel, open cap, drain water, remove debris.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam or high-pressure cleaners.

Regulatory Information

Complies with UK and EU safety and EMC directives. Energy label according to EU regulations. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power, door, child lock	Check plug/power; ensure door closed; deactivate child lock.
No water intake	Taps, hose, filter	Ensure taps are on; check hose for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts, leveling, load	Remove transit bolts; re-level machine; redistribute laundry.
Water not draining	Drain hose, filter blockage	Check drain hose height/blockage; clean pump filter.
Error codes on display	Various faults	Consult manual error code list; reset by turning off/on.
Poor wash results	Detergent, load, program	Use correct detergent amount/dose; do not overload; select suitable program.

Reset: Turn machine off at plug for 2 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk