Hotpoint washing machine NSWR 843C WK UK manual

The Hotpoint NSWR 843C WK UK is a freestanding washing machine with an 8kg load capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs including Cotton, Synthetics, Delicates, Wool, and Quick Wash. It features a digital display, delay start, child lock, anti-flood protection, and AquaStop technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (blue marking) and machine inlet.
3. Connect drain hose: Place in standpipe (min height 60cm) or hook over sink edge.
4. Level the machine: Adjust front feet using spanner; ensure it does not rock.
5. Plug into a grounded 220-240V AC power socket.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on: Press the On/Off button.
2. Run initial cycle: Select the "Drum Clean" program without laundry and press Start.
3. Set preferences: Use the Settings button to adjust buzzer volume, end-of-cycle signal.
4. Load laundry: Sort fabrics by colour and care label.
5. Add detergent: Use compartments I (pre-wash), II (main wash), * (softener).

CAUTION! Ensure transit bolts are removed before use to prevent severe damage.

Specifications

• Model: NSWR 843C WK UK
• Capacity: 8kg
• Spin Speed: 1400 RPM (adjustable)
• Energy Class: A+++
• Water Pressure: 0.5 - 8 bar
• Programs: 14 including Cotton (20°C-90°C), Synthetics, Delicates, Wool, Quick 15
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Power Supply: 220-240V AC, 50Hz
• Noise Level: Wash: 53 dB, Spin: 73 dB

Controls and Settings

Control Panel: On/Off button, Program selector knob, Display, Start/Pause, Delay Start, Settings, and Option buttons.

Display Icons: Time remaining, child lock, delay start, temperature, spin speed, door locked.

Program Selection: Turn knob to desired program (e.g., Cotton, Eco 40-60). Options: Adjust temperature (20°C-90°C), spin speed (0-1400 RPM), extra rinse, pre-wash via Option buttons. Settings Menu: Press Settings to adjust buzzer volume (Off/1/2/3), end signal, button beep. Child Lock: Press and hold Delay Start + Option 2 for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue-coded hose to cold water tap. Drain: Ensure drain hose is secured at correct height (60-100cm from floor).

1. Turn off water tap before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Ensure drain hose is not kinked or submerged.
4. Check for leaks after first connection.

Tip: Use AquaStop hose (if supplied) for enhanced leak protection.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not exceed 8kg; distribute evenly.
2. Add detergent: Use correct amount for load size and water hardness.
3. Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
4. Adjust options: Set temperature, spin speed, extra rinse if needed.
5. Start: Press Start/Pause; door locks automatically.
6. Delay Start: Press Delay Start to set start time (1-24 hours).
7. End of cycle: Machine beeps; door unlocks after a short delay.
8. Unload promptly to avoid creasing.

WARNING! Do not open door during wash; wait for unlock symbol. Remove all objects from pockets.

Special Functions

Delay Start: Postpone cycle start up to 24 hours. Child Lock: Locks control panel. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Extra Rinse: Adds additional rinse for sensitive skin. Pre-Wash: For heavily soiled loads.

Care & Cleaning

Regular maintenance ensures optimal performance.

1. Clean detergent drawer: Remove and rinse under warm water monthly.
2. Clean door seal: Wipe rubber gasket to remove lint and residue.
3. Run Drum Clean: Use monthly with dedicated cleaner or 90°C cotton cycle without laundry.
4. Clean filter: Locate at front bottom; turn drain cap slowly to release water, then remove and clean filter.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

Complies with UK and EU safety standards. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk