Hotpoint washing machine NSWR 843C BS UK manual

The Hotpoint NSWR 843C BS is a freestanding 8kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8kg drum, Digital Display, Program Dial, Delay Start Button, Child Lock, Anti-Flood System, Inlet Hoses, Drain Hose.

Feature	Description
Capacity	8kg (dry weight)
Energy Rating	A+++
Spin Speed	Up to 1400 RPM
Digital Display	Shows time, program, and status
Program Dial	Selects wash programs
Delay Start	Delays cycle start up to 24 hours
Child Lock	Locks controls during operation
Anti-Flood Protection	Automatic shut-off if leak detected
Quick Wash	30-minute cycle for lightly soiled items
Eco 40-60	Energy-efficient program for 40°C & 60°C washes

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue) and hot if available (red).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust front feet until machine is stable and does not rock.
Plug into grounded 3-pin socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on machine; run initial empty wash.

Select language: Press and hold Start/Pause for 3 seconds to set display language (default ENGLISH).
Run cleaning cycle: Turn dial to Cotton 90°C, add detergent to drawer, and run empty cycle.
Set clock: Press and hold Delay Start to set current time.
Test functions: Select Quick Wash to verify operation.

CAUTION! Ensure water taps are fully open and hoses are not kinked.

Specifications

Model: NSWR 843C BS UK
Capacity: 8kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 9,500 litres per year
Spin Speed: 1400 RPM
Noise Level: 53 dB (wash), 73 dB (spin)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Programs: 15 including Cotton, Synthetic, Delicates, Wool, Quick Wash

Controls and Settings

Access settings via Program Dial and digital display buttons.

Control Panel: Program Dial, Start/Pause, Delay Start, Child Lock, Spin Speed, Temperature.

Programs: COTTON (20°C-90°C), SYNTHETICS (30°C-60°C), DELICATES (cold-40°C), WOOL, QUICK WASH (30 min). Settings: Spin speed (400-1400 RPM), Temperature (cold to 90°C), Delay Start (1-24 hours), Child Lock (press for 3 seconds). Display: Shows time remaining, program, and options.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100 cm).

Turn off taps before connecting hoses.
Ensure rubber seals are in place on hose ends.
Secure drain hose with clip; do not submerge in water.
Check for leaks after first connection.

Tip: Use only provided hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 8kg; distribute evenly.
Add detergent: Pour into drawer compartment II (main wash).
Select program: Turn dial (e.g., Cotton for towels/bedding).
Adjust settings: Press Spin or Temp to modify.
Start: Press Start/Pause; display shows time remaining.
Pause/Stop: Press Start/Pause to pause; hold to cancel.
After cycle: Remove laundry promptly; leave door ajar to dry.

WARNING! Do not wash items soaked in flammable liquids. Check pockets for objects.

Special Functions

Delay Start: Press button, use arrows to set hours (1-24). Child Lock: Press and hold for 3 seconds to activate/deactivate. Anti-Flood: Automatic; no user setting required.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; never hose down the machine.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 247 365.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is shut; check plug and socket; press Start.
No water intake	Taps closed/hose kinked	Open taps; straighten hoses; check for blockages.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level.
Water not draining	Drain hose blocked	Check hose for kinks; clean filter (front bottom).
Error code on display	Various faults	Refer to manual error list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 247 365; www.hotpoint.co.uk