Hotpoint washing machine NSWM945CWUKN manual

The Hotpoint NSWM945CWUKN is a 9kg capacity freestanding washing machine with an A+++ energy rating, featuring 1400rpm spin speed, Direct Drive motor technology, Anti-Stain removal system, Steam Refresh cycle, AquaCare technology for fabric protection, and multiple wash programs including Quick Wash, Eco Cotton, and Delicates. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum capacity, LED display, rotary program selector, detergent dispenser, Direct Drive motor, steam function, child lock.

Feature	Description
Capacity	9kg maximum load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400rpm
Direct Drive Motor	Quiet operation with 10-year warranty
Anti-Stain System	Targets 30+ common stains
Steam Refresh	Reduces wrinkles and odors
AquaCare Technology	Gentler on fabrics, reduces water consumption
Quick Wash	15-minute cycle for lightly soiled items
LED Display	Shows time remaining, cycle info, and alerts
Child Lock	Prevents accidental program changes

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine inlet.
Connect drain hose: Place in standpipe or sink (minimum height 60cm).
Level the machine: Adjust front feet to ensure stability; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Press POWER button; LED display lights up.
Run initial cycle: Select "Drum Clean" program (without laundry) at 90°C to remove residues.
Set preferences: Use SETTINGS button to adjust buzzer volume, default temperature, spin speed.
Load detergent: Fill detergent dispenser compartments as per instructions.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: NSWM945CWUKN
Capacity: 9kg (cotton)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Energy Rating: A+++
Annual Energy Consumption: 150kWh
Water Consumption: 9,500 litres per year
Spin Speed: 1400rpm (maximum)
Noise Level: 74dB (wash), 76dB (spin)
Programs: 15 including Eco Cotton, Delicates, Wool, Sportswear
Power Supply: 220-240V, 50Hz

Controls and Settings

Control panel: POWER button, rotary program selector, START/PAUSE, OPTIONS buttons, LED display.

Program Selection: Turn knob to desired program (Eco Cotton, Quick 15, Delicates, etc.).

Options: Temperature (cold to 90°C), spin speed (0-1400rpm), extra rinse, pre-wash, delay start (up to 24h). Settings Menu: Press SETTINGS to adjust buzzer volume (Off/1/2/3), default temperature, child lock activation. Display Symbols: Door locked, cycle phase, time remaining, error codes.

Connecting Water & Drain

Water inlet: Cold fill only (blue hose). Drain: Hose to standpipe or sink.

Ensure water tap is off before connecting hoses.
Connect inlet hose to machine (right side) and cold water tap.
Secure drain hose in standpipe (max height 100cm) or over sink edge.
Check for leaks by turning on water tap briefly before first use.

Tip: Use hose clips provided to secure connections. Do not kink hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load items loosely (do not overload).
Add detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob (e.g., Eco Cotton for everyday items).
Set options: Adjust temperature, spin speed, extra functions as needed.
Start: Press START/PAUSE; door locks and cycle begins.
After cycle: Door unlocks; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during cycle; wait for unlock symbol. Check pockets for objects.

Special Functions

Anti-Stain: Select program, press ANTI-STAIN button to activate stain removal. Steam Refresh: 20-minute cycle to refresh lightly worn clothes. Delay Start: Set delay (1-24h) for cycle to begin later. Child Lock: Press and hold CHILD LOCK for 3 seconds to lock controls.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and drum.

Detergent drawer: Remove, rinse under warm water.
Door seal: Wipe with damp cloth to remove lint and residue.
Drum: Run "Drum Clean" program monthly (without laundry).
Filter: Clean drain filter every 3 months (located behind lower panel).

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

EU Ecodesign Directive compliant. Conforms to EN 60456:2016. Waste Electrical and Electronic Equipment (WEEE) regulations apply; dispose of properly. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in; ensure door is closed properly; press START/PAUSE.
No water intake	Tap/hose	Ensure water tap is on; check hose for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check drain hose is not blocked; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load evenly; level machine.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 2265; www.hotpoint.co.uk