Hotpoint washing machine NSWM845CWUKN manual

The Hotpoint NSWM845CWUKN is a freestanding washing machine with an 8kg capacity, A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, child lock, quick wash cycles, and anti-allergy settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, detergent drawer, door with safety lock, water inlet hoses, drain hose, adjustable feet, and filter access.

Feature	Description
Capacity	8kg drum capacity for family loads
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM for faster drying
Digital Display	Shows cycle time, settings, and status
Delay Start	Program start up to 24 hours later
Child Lock	Prevents accidental program changes
Quick Wash	30-minute cycle for lightly soiled items
Anti-Allergy	Special cycle to reduce allergens
Detergent Drawer	Compartments for pre-wash, main wash, softener
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level surface near water and drain points.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine inlet.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash cycle.

Set language: Press and hold START/PAUSE and PROGRAM buttons for 3 seconds to select language.
Run cleaning cycle: Select "Drum Clean" program without detergent to remove residues.
Adjust settings: Use CONTROL knob to set default options like spin speed, temperature.
Test operation: Load small load, run quick wash to verify function.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: NSWM845CWUKN.
Capacity: 8kg.
Energy Class: A+++.
Spin Speed: 1400 RPM (adjustable).
Water Pressure: 0.5-10 bar.
Programs: Cotton, Synthetic, Delicates, Wool, Quick Wash, Anti-Allergy, Drum Clean.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Power Supply: 220-240V, 50Hz.
Noise Level: 65 dB (washing), 75 dB (spinning).

Controls and Settings

Access settings via CONTROL knob and buttons. Display shows time, temperature, spin speed.

Control Panel: POWER, START/PAUSE, DELAY START, CHILD LOCK, PROGRAM knob, OPTIONS buttons.

Programs: Select via knob (Cotton, Synthetic, Delicates, Wool, Quick 30', Anti-Allergy, Drum Clean). Options: Temperature (cold-90°C), Spin Speed (0-1400 RPM), Extra Rinse, Pre-wash. Settings: Delay start (1-24h), Child lock (press 3 sec), Reset (hold POWER 5 sec).

Connecting Water & Drain

Water Inlet: Cold fill only (blue hose). Drain: Hose to standpipe or sink.

Turn off water tap before connecting hoses.
Attach hose to machine inlet (right side); hand-tighten.
Connect other end to cold water tap; ensure washers are fitted.
Place drain hose in standpipe (max height 100cm) or secure over sink edge.
Check for leaks by turning on tap briefly.

Tip: Do not kink hoses; ensure drain hose is not submerged to prevent siphoning.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pour into drawer compartments (I=pre-wash, II=main wash, flower=softener).
Select program: Turn knob to desired cycle (e.g., Cotton for towels).
Set options: Press TEMPERATURE or SPIN to adjust.
Start: Press START/PAUSE; display shows time remaining.
Pause/stop: Press START/PAUSE to pause; hold to cancel.
Unload: Wait for door lock light off; remove laundry, clean filter monthly.

WARNING! Do not open door during cycle; wait for lock light to extinguish. Remove objects from pockets.

Special Features

Delay Start: Set 1-24 hours for delayed start. Child Lock: Press 3 sec to lock controls. Anti-Allergy: High-temperature cycle to reduce allergens. Quick Wash: 30-minute cycle for small, lightly soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep control panel dry. Clean filter regularly to prevent blockages.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in; ensure door is closed properly; press START/PAUSE.
No water entering	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose for kinks/blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes on display	Various faults	Refer to manual code list (e.g., F01=door fault, F05=drain issue).

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk