Hotpoint washing machine NSWM845CBSUKN manual

The Hotpoint NSWM845CBSUKN is a freestanding 8kg capacity washing machine with an A+++ energy rating, featuring 1400 RPM spin speed, multiple wash programs including Eco 40-60, Cotton, Synthetics, Delicates, Wool, and Quick Wash, a delay timer up to 24 hours, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent drawer, door with safety lock, water inlet valves, drain pump filter, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn feet to level the machine; use spirit level.
3. Connect water supply: Attach inlet hose to cold water tap (3/4” thread). Ensure washers are fitted.
4. Connect drain hose: Place hose into standpipe or sink (max height 100 cm).
5. Plug into grounded power socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on machine: Plug in and press POWER button.
2. Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry and detergent.
3. Set preferences: Use OPTIONS button to adjust spin speed, temperature, etc.
4. Load detergent: Add powder/liquid to correct compartments of drawer.

CAUTION! Ensure all packaging is removed. Check for water leaks after first connection.

Specifications

• Model: NSWM845CBSUKN
• Type: Freestanding front-load washing machine
• Capacity: 8 kg
• Energy Class: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 9,000 litres per year
• Spin Efficiency Class: B
• Noise Level (Wash/Spin): 53/76 dB(A)
• Mains Supply: 230-240V ~ 50Hz
• Max Power: 2100 W
• Programs: 14 including Eco 40-60, Cotton, Synthetics, Delicates, Wool, Quick Wash, Sport, Jeans, Anti-Allergy

Controls and Settings

Control Panel: POWER button, rotary program selector, START/PAUSE button, OPTIONS buttons (Temp, Spin, Delay), digital display.

Display Icons: Time remaining, child lock, delay start, temperature, spin speed, program phase.

Program Selection: Turn dial to desired program (e.g., Cotton, Eco 40-60). Options: Adjust temperature (cold to 90°C), spin speed (0 to 1400 RPM), delay timer (1-24 hrs). Start/Pause: Press to begin or pause cycle. Child Lock: Press and hold DELAY and OPTION buttons for 3 seconds to lock/unlock controls.

Connecting Water & Drain

Water Inlet: Cold fill only (hose supplied). Drain: Hose can be placed in sink or standpipe.

1. Ensure water tap is off before connecting hose.
2. Connect hose to machine first, then to tap. Hand-tighten only.
3. Place drain hose securely; do not kink.
4. After connections, turn on tap and check for leaks.

Tip: Use hose clips if drain hose is placed in standpipe to prevent slipping.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
3. Select program: Turn dial (e.g., Cotton for cottons, Synthetics for blends).
4. Adjust options: Press TEMP/SPIN/DELAY to modify as needed.
5. Start: Press START/PAUSE. Display shows time remaining.
6. End of cycle: Machine beeps; door unlocks after a short delay.
7. Unload promptly to avoid creasing.

WARNING! Do not open door during high-temperature washes; wait for cool-down.

Special Features

Delay Start: Set delay up to 24 hours. Child Lock: Locks controls during operation. Anti-Flood: AquaStop protects against hose leaks. Drum Clean: Program to clean drum and prevent odours.

Care & Cleaning

Regularly clean detergent drawer, door seal, and drum filter.

1. Detergent drawer: Pull out, rinse under warm water.
2. Door seal: Wipe with damp cloth to remove lint/residue.
3. Drain filter: Locate behind kickplate; turn anti-clockwise to remove and clean.
4. Run Drum Clean program monthly.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Manufactured to EN 60456 safety standards. Disposal: Follow local WEEE regulations; do not dispose with household waste. For support, visit www.hotpoint.co.uk or contact 0333 305 3514.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 3514; www.hotpoint.co.uk