Hotpoint washing machine NSWM1045CWUKN manual

The Hotpoint NSWM1045CWUKN is a 10kg capacity front-loading washing machine with A+++ energy rating, 1400 RPM spin speed, multiple wash programs, delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and door lock.

Feature	Description
Capacity	10kg laundry load
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM
Programs	15 wash programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system
Display	LED digital display with time remaining
Door	Reversible for left/right opening
Dimensions	850mm H x 600mm W x 595mm D

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Level machine using adjustable feet; ensure no rocking.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and power on machine; run initial empty wash.

Set language: Press and hold Start/Pause for 3 seconds to select language.
Run cleaning cycle: Select "Drum Clean" program without laundry.
Adjust settings: Use Settings button to set time, volume, etc.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (softener).

CAUTION! First use may produce slight odor; this is normal and will disappear.

Specifications

Model: NSWM1045CWUKN
Capacity: 10kg
Energy Class: A+++
Annual Consumption: 175 kWh
Water Consumption: 10,200 litres/year
Spin Speed: 1400 RPM
Noise Level: Wash 53 dB, Spin 75 dB
Programs: 15 including Eco 40-60, Wool, Sport, Jeans
Power Supply: 220-240V, 50Hz
Weight: 72kg

Controls and Settings

Control Panel: Power button, Program selector, Temperature button, Spin speed button, Delay Start button, Start/Pause button, Child Lock button.

Display Icons: Time remaining, temperature, spin speed, delay start, child lock, door locked.

Settings: Press and hold Settings for 3 seconds to access - volume, end signal, time format. Programs: Select with dial - Cotton (40°C, 60°C, 90°C), Synthetic, Delicate, Quick Wash (30 min), Eco 40-60, Wool, Drum Clean. Options: Adjust temperature (cold to 90°C), spin speed (400-1400 RPM, Rinse Hold), delay start (1-24h).

Connecting Water & Drain

Water Inlet: Two hoses (blue=cold, red=hot). Drain: Hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not extend.
Drain hose height: 60-100cm from floor.
Check for leaks after connections.

Tip: Install AquaStop valve properly; test by turning on taps briefly.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color and fabric type.
Load machine: Do not exceed 10kg; distribute evenly.
Add detergent: Use compartments I, II, * as needed.
Select program: Turn dial to desired program.
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press Start/Pause; door locks automatically.
After wash: Remove laundry promptly; leave door ajar to dry.

WARNING! Do not wash waterproof items (raincoats, shower curtains).

Special Functions

Delay Start: Press Delay button, set hours (1-24). Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate. Extra Rinse: Adds additional rinse cycle. Rinse Hold: Stops with water in drum for easy hand rinsing.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run "Drum Clean" program every 30 washes. Clean drain pump filter quarterly.

CAUTION! Do not use abrasive cleaners or solvents. Clean filter only when machine is off and empty.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. Please recycle. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press Start/Pause.
No water intake	Taps/hoses	Ensure taps on; check hoses not kinked; clean inlet filter.
Water doesn't drain	Drain filter	Clean pump filter; check drain hose height.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Error codes (E01-E10)	Various faults	Consult manual; unplug for 5 minutes; restart.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 2265; www.hotpoint.co.uk