Hotpoint Washing Machine NSWM1045CGGUKN Manual

The Hotpoint NSWM1045CGGUKN is a freestanding 10kg capacity washing machine with an A+++ energy rating, featuring multiple wash programs, a 1400 RPM spin speed, AquaCare technology for reduced creasing, and a delay timer. It includes safety features, installation guidelines, and maintenance instructions. Below are key sections for safety, features, installation, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent drawer, drum, water inlet hoses, drain hose, and adjustable feet.

Installation

Unpack and inspect contents. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove bolts at the rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
3. Connect drain hose: Place hose into standpipe or sink; ensure no kinks.
4. Level the machine: Adjust feet using a spanner until machine is stable.
5. Plug into a grounded power outlet.

WARNING! Do not install in areas prone to freezing or extreme heat. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

1. Remove any packaging from inside the drum.
2. Connect water and power as per installation.
3. Run a cotton cycle at 90°C without laundry to clean the drum.
4. Set language if applicable via control panel (default is English).
5. Familiarize yourself with control functions and program options.

CAUTION! Ensure the machine is level to prevent excessive vibration during spin cycles.

Specifications

• Model: NSWM1045CGGUKN
• Capacity: 10kg
• Energy Rating: A+++
• Spin Speed: 1400 RPM
• Water Pressure: 0.5 - 10 bar
• Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash (14 min), Sportswear, Anti-Allergy
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Power Supply: 220-240V, 50Hz
• Noise Level: Wash: 53 dB, Spin: 75 dB
• Weight: 70kg

Controls and Settings

Control Panel: Rotary dial for program selection, START/PAUSE button, OPTIONS buttons (e.g., Extra Rinse, Delay Start), and digital display.

Program Selection: Turn dial to desired program (e.g., Cotton, Synthetics). Display shows default time and temperature.

Options: Press relevant button to modify: Temperature (30°C-90°C), Spin Speed (400-1400 RPM or Rinse Hold), Delay Start (1-24h), Extra Rinse, Pre-Wash.

Child Lock: Press and hold START/PAUSE and OPTION button for 3 seconds to activate/deactivate.

Detergent Drawer: Compartment I: Pre-wash; Compartment II: Main wash detergent; Compartment III: Fabric softener.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Place hose securely in standpipe (max height 100cm) or over sink edge.

1. Ensure taps are off before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Secure drain hose to prevent slipping.
4. After connection, open taps fully and check for leaks.

Tip: Use hose clips if provided to ensure secure connections.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Pour into correct drawer compartment.
3. Select program: Turn dial (e.g., Cotton for towels/bedding).
4. Adjust options: Set temperature, spin speed, delay as needed.
5. Start: Press START/PAUSE; display shows time remaining.
6. Pause/Stop: Press START/PAUSE to pause; turn dial to reset to stop.
7. End of cycle: Signal sounds; door unlocks after a short delay.

WARNING! Do not open door during high-temperature washes; wait for unlock signal. Remove items promptly to prevent creasing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

• Detergent Drawer: Pull out and clean monthly under running water.
• Drum: Run maintenance wash (90°C cotton program without laundry) monthly.
• Filter: Clean pump filter every 3 months: Turn off machine, open filter cover at front, drain water, remove debris.
• Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Ensure machine is drained to avoid spills.

Safety Information

Read all instructions before use. Keep packaging away from children.

• Do not use extension cords; plug directly into grounded outlet.
• Do not wash items soiled with flammable substances (e.g., petrol).
• Ensure water and electrical connections are correct to avoid hazards.
• Use only detergents suitable for washing machines.
• Child Lock prevents accidental program changes by children.

WARNING! Risk of electric shock if machine is used improperly or damaged.

Regulatory Information

Complies with EU directives for safety (EN 60335-1, EN 60335-2-7) and electromagnetic compatibility (EN 55014-1, EN 55014-2). Energy label according to EU Regulation 2019/2014. Waste electrical products should not be disposed of with household waste; recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

Reset: Unplug for 1 minute to reset electronic control.

Service: 0333 305 2265; www.hotpoint.co.uk