Hotpoint washing machine NSWM 944C BS UK N manual

The Hotpoint NSWM 944C BS UK N is a freestanding washing machine with a 9kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray pre-wash, and AquaSave system for efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent drawer, drum, filter, and adjustable feet.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
2. Adjust feet: Turn feet to level machine; use spirit level.
3. Connect water inlet: Attach hoses to cold water tap (and hot if applicable).
4. Connect drain hose: Place in standpipe or sink; secure with hook.
5. Plug into grounded socket.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

1. Check connections: Ensure water and drain are secure.
2. Load detergent: Fill drawer with powder/liquid as per instructions.
3. Select program: Turn knob to "Cotton 60°C".
4. Start: Press Start/Pause to begin empty wash (removes residues).
5. Set preferences: Use Settings button for beep volume, etc.

CAUTION! Ensure machine is level to prevent vibration.

Specifications

• Model: NSWM 944C BS UK N
• Capacity: 9kg
• Spin Speed: 1400 RPM
• Energy Rating: A+++
• Water Pressure: 0.5-8 bar
• Programs: 16 programs including Cotton, Synthetics, Delicates, Wool, Quick Wash
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Power Supply: 220-240V, 50Hz
• Noise (wash/spin): 56dB / 76dB

Controls and Settings

Control Panel: Rotary selector, Start/Pause, Delay Start, Settings, Spin Speed, Temperature.

Display: Shows time remaining, cycle stage, options.

Programs: Cotton (40°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Anti-Stain, Quick 30, Spin Only, Rinse & Spin. Options: Extra Rinse, Pre-Wash, Delay Start (1-24h), Child Lock (press Settings + Spin for 3 sec). Settings: Beep volume, end of cycle signal.

Connecting Water & Drain

Water Inlet: Cold (mandatory) and hot (optional) hoses. Drain: Hose to standpipe or sink.

1. Turn off water tap before connecting.
2. Attach hoses: Screw onto taps; do not overtighten.
3. Drain hose: Insert into standpipe (max height 100cm) or secure over sink edge.
4. Check for leaks: Run quick test cycle.

Tip: Use new hoses; replace every 5 years.

Using Wash Programs

Supports various fabrics and soil levels.

1. Sort laundry: By colour and fabric type.
2. Load drum: Do not overload; leave space at top.
3. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
4. Select program: Turn knob (e.g., Cotton for towels/bedding).
5. Adjust options: Temperature, spin speed, extra rinse if needed.
6. Start: Press Start/Pause; display shows time remaining.
7. Unload promptly after cycle to avoid creases.

WARNING! Do not wash waterproof items (e.g., raincoats).

Special Functions

Anti-Stain: Select program for specific stains (wine, grass, etc.). Direct Spray: Pre-wash spray activates for tough stains. Delay Start: Set start time up to 24 hours ahead. Child Lock: Locks controls during cycle.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, filter.

1. Drawer: Pull out, rinse under tap.
2. Drum: Run empty hot wash (90°C) with drum cleaner.
3. Filter: Turn off machine, open flap at front, unscrew filter, clean debris.
4. Door seal: Wipe with damp cloth.

CAUTION! Unplug before cleaning filter.

Regulatory Information

EU Ecodesign and Energy Label regulations compliant. UKCA marked. Manufactured for the UK market. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk