Hotpoint washing machine NSWM 943C GG UK manual

The Hotpoint NSWM 943C GG is a freestanding washing machine with a 9kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features multiple wash programs, a digital display, delay start, child lock, and quick wash options. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Drum, Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump, Door Lock.

Feature	Description
Capacity	9kg load capacity
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM
Digital Display	Shows time, program, and status
Detergent Drawer	Compartments for pre-wash, main wash, softener
Programmes	Cotton, Synthetics, Delicates, Quick Wash, etc.
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic during cycle
Quick Wash	30-minute cycle for small loads

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; ensure no kinks.
Level the machine: Adjust feet until stable; use spirit level.
Plug into grounded socket.

WARNING! Do not install in wet areas. Ensure water connections are tight to avoid leaks.

First-Time Setup

Plug in and run a maintenance wash.

Power on: Press POWER button; display lights up.
Select maintenance wash: Choose Cotton 90°C without laundry.
Add detergent: Pour 100ml detergent into drawer compartment II.
Start cycle: Press START/PAUSE; let complete to clean drum.
Set preferences: Use settings menu for buzzer, default temperature, etc.

CAUTION! Remove all packaging and transit bolts before first use.

Specifications

Model: NSWM 943C GG UK
Capacity: 9kg
Energy Class: A+++
Spin Speed: 1400 RPM
Programmes: 15+ including Cotton, Eco, Synthetics, Delicates, Quick Wash
Water Pressure: 0.5-10 bar
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): 85cm x 60cm x 60cm
Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: POWER, START/PAUSE, Programme Selector, Temperature, Spin Speed, Delay Start, Options.

Display: Shows programme duration, temperature, spin speed, delay time, and error codes.

Programmes: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (cold-40°C), Quick Wash (30 min), Eco 40-60, Wool, Sport, etc. Settings: Child Lock (hold buttons 3 sec), Buzzer On/Off, Default Temperature, End of Cycle Signal.

Connecting Water & Drain

Water Inlet: Two hoses (blue for cold, red for hot). Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect hoses to machine and taps; hand-tighten plus quarter turn.
Place drain hose in standpipe (max height 100cm) or over sink edge.
Check for leaks; run short rinse cycle.

Tip: Use hose clips if provided; ensure drain hose is not submerged.

Using Wash Programs

Select programme based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select programme: Turn selector knob (e.g., Cotton).
Adjust settings: Press TEMP and SPIN to change temperature/speed.
Add options: Press DELAY START for timer; QUICK WASH for speed.
Start: Press START/PAUSE; door locks automatically.
After cycle: Wait for door unlock signal; remove laundry promptly.

WARNING! Do not open door during cycle; wait for unlock indicator.

Special Functions

Delay Start: Set 1-24 hours. Child Lock: Hold TEMP and SPIN for 3 seconds. Quick Wash: 30-minute cycle for lightly soiled items. Extra Rinse: Adds rinse cycle. Pre-Wash: For heavily soiled loads.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Remove and rinse under warm water.
Door seal: Wipe with damp cloth; remove debris.
Filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean under tap.
Run maintenance wash: Empty drum, use 90°C Cotton programme.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure taps on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration	Transit bolts/level	Ensure transit bolts removed; adjust feet for level.
Error code on display	Various faults	Consult manual for code meaning; reset by unplugging 1 minute.

Reset: Unplug for 1 minute; plug back in.

Service: 03448 113 113; www.hotpoint.co.uk