The Hotpoint NSWM 864C BS UK N is a freestanding 8kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs including Eco 40-60, Cotton, Synthetics, Delicates, Wool, and Quick Wash. It features a large LED display, rotary dial control, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: 8kg drum, LED display, Rotary program selector, Detergent drawer, Door with safety lock, Adjustable feet, Water inlet hoses, Drain hose.
| Feature | Description |
|---|---|
| Capacity | 8kg (dry laundry weight) |
| Energy Rating | A+++ (most efficient) |
| Spin Speed | Up to 1400 RPM |
| Display | LED with time remaining and cycle indicators |
| Programs | 14 programs including Eco 40-60, Cotton, Quick 15' |
| Delay Timer | Up to 24 hours |
| Child Lock | Prevents accidental program changes |
| Anti-Flood Protection | AquaStop technology |
| Door Lock | Safety lock during operation |
| Adjustable Feet | For leveling on uneven floors |
Unpack and remove all transit bolts and packaging. Place on stable, level floor.
WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before first use to prevent damage.
Before first wash, run a maintenance cycle.
CAUTION! Ensure all packaging and transit bolts are removed. Check water connections for leaks.
Control Panel: POWER button, Rotary program selector, START/PAUSE button, OPTIONS button, LED display.
Display Icons: Time remaining, Spin speed, Temperature, Delay timer, Child lock, Door locked.
Program Selection: Turn rotary dial to desired program (e.g., Cotton, Eco 40-60). Options: Press OPTIONS to adjust spin speed (0-1400 RPM), temperature (Cold-90°C), and select extra functions (e.g., Extra Rinse, Pre-wash). Delay Timer: Set delay start (1-24 hours) before pressing START. Child Lock: Press and hold OPTIONS and START for 3 seconds to activate/deactivate.
Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose securely.
Tip: Use AquaStop hose (if supplied) for additional flood protection.
Select program based on fabric type and soil level.
WARNING! Do not open door during wash/spin; wait for door lock symbol to disappear.
Extra Rinse: Adds an additional rinse cycle. Pre-wash: For heavily soiled items. Delay Start: Delays cycle start up to 24 hours. Child Lock: Locks controls to prevent changes. Drum Clean: Program to clean drum; run monthly.
Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly: Pull out, rinse under tap. Clean drum: Run "Drum Clean" program monthly without laundry. Clean filter: Locate filter at front bottom; place towel, open slowly, rinse filter.
CAUTION! Do not use abrasive cleaners. Ensure filter is securely closed after cleaning.
Complies with EU Ecodesign and Energy Label regulations. Conforms to safety standards EN 60335-1, EN 60335-2-7. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine does not start | Power/Door/Child Lock | Check plug, ensure door closed properly, deactivate child lock. |
| No water intake | Taps/Hoses/Filter | Ensure taps are on, hoses not kinked, clean inlet filter. |
| Water does not drain | Drain hose/Filter | Check drain hose for kinks/blockage, clean pump filter. |
| Excessive vibration/noise | Transit bolts/Leveling/Overload | Ensure transit bolts removed, level machine, reduce load. |
| Error codes (e.g., F01, F02) | Various faults | Consult manual error code list; unplug for 5 minutes, restart. |
| Detergent not dispensed | Drawer blocked | Clean detergent drawer compartments. |
Reset: Unplug for 5 minutes, then restart.
Service: 03448 113 113; www.hotpoint.co.uk