Hotpoint washing machine NSWM 743U W UK N manual

The Hotpoint NSWM 743U W UK N is a freestanding washing machine with a 7kg capacity, A+++ energy rating, and 1400 rpm spin speed. It features multiple wash programmes, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7kg laundry load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Display	Digital LED with time remaining
Programmes	Cotton, Synthetics, Delicates, Quick Wash, etc.
Delay Start	Up to 24 hours
Child Lock	Prevents accidental programme changes
Anti-Flood	AquaStop™ protection system
Door	Reversible for left/right opening
Dimensions (HxWxD)	850 x 596 x 545 mm

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (blue) and hot if needed (red).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power socket.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and run a maintenance wash.

Check installation: Ensure machine is level and hoses secure.
Open water taps fully.
Run first wash: Select Cotton 90°C programme without laundry to clean drum.
Set language: If applicable, use settings button to select English.
Test child lock: Press and hold relevant buttons to activate/deactivate.

CAUTION! Do not load laundry during first maintenance wash.

Specifications

Model: NSWM 743U W UK N
Capacity: 7 kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 litres per cycle (cotton 60°C)
Spin Speed: 1400 rpm (adjustable)
Noise Level (wash/spin): 53/76 dB(A)
Supply Voltage: 220-240 V, 50 Hz
Max Load Power: 2300 W
Programmes: 15 including Eco 40-60, Wool, Hand Wash

Controls and Settings

Control Panel: Programme knob, display, temperature button, spin speed button, option buttons (Delay Start, Extra Rinse, etc.), Start/Pause.

Programme Selection: Turn knob to desired programme (e.g., Cotton, Synthetics). Temperature: Press TEMP to cycle through options (Cold to 90°C). Spin Speed: Press SPIN to select speed (Rinse Hold to 1400 rpm). Options: Select Extra Rinse, Pre-Wash, etc. as needed. Delay Start: Press DELAY to set start time (1-24 hrs). Start/Pause: Press to begin or pause cycle.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold tap; red to hot if required. Drain: Secure hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not lengthen.
Drain hose must not be kinked or submerged.
Check for leaks after first connection.

Tip: Use hose clips provided for secure connection.

Using Wash Programmes

Select programme based on fabric type and soil level.

Load laundry: Do not exceed 7 kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select programme: Turn knob (e.g., Cotton for linens).
Adjust settings: Set temperature, spin speed, options.
Start: Press Start/Pause; display shows time remaining.
End of cycle: Signal sounds; door unlocks after a short time.
Unload promptly to avoid creasing.

WARNING! Do not wash items soiled with flammable substances.

Safety Features

Child Lock: Press and hold Delay Start and Extra Rinse for 3 seconds to lock/unlock controls. Anti-Flood: AquaStop™ detects leaks and blocks water supply. Door Lock: Door locks during wash; do not force open.

Care & Cleaning

Regular maintenance ensures performance.

Clean detergent drawer: Pull out, rinse under tap.
Clean drum: Run Cotton 90°C programme monthly without laundry.
Clean filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter cap to drain water; remove debris; reinsert.
Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Ensure water is drained.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power; ensure child lock is off.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain blocked/filter clogged	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/uneven load	Ensure transit bolts removed; redistribute laundry; level feet.
Error codes on display	Various faults	Consult manual error code list; try reset by unplugging for 2 minutes.

Reset: Unplug for 2 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk