Hotpoint washing machine NSWM 743U GG UK N manual

The Hotpoint NSWM 743U GG UK N is a freestanding washing machine with a 7kg capacity, A+++ energy rating, and 1400 rpm spin speed. It features multiple wash programs, electronic controls, a digital display, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door, water inlet hoses, drain hose, adjustable feet.

FeatureDescription
Capacity7kg laundry load
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 rpm
ProgramsCotton, Synthetics, Delicates, Quick Wash, etc.
Delay StartUp to 24 hours
Child LockPrevents accidental program changes
Digital DisplayShows time, cycle, and settings
Anti-Flood ProtectionLeak detection system
Door LockAutomatic during cycle
Adjustable FeetFor leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  4. Level the machine: Adjust feet using wrench; ensure it does not rock.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or high humidity. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash.

  1. Set language: Press and hold START/PAUSE for 3 seconds to select language (default ENGLISH).
  2. Load detergent: Fill drawer compartments as per detergent instructions.
  3. Select program: Turn knob to "Cotton 60°C" for initial clean.
  4. Start cycle: Press START/PAUSE; machine will run approximately 2 hours.
  5. After cycle, wipe drum and door seal with dry cloth.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Controls and Settings

Control Panel: Program knob, digital display, temperature button, spin speed button, option buttons (Delay, Prewash, Extra Rinse), START/PAUSE.

Program Knob: Select wash programs (Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.).

Temperature: Adjust with TEMP button (cold to 90°C). Spin Speed: Adjust with SPIN button (0 to 1400 rpm). Options: Delay Start (1-24h), Prewash (for heavily soiled), Extra Rinse (for sensitive skin). Child Lock: Press and hold DELAY + TEMP for 3 seconds to activate/deactivate.

Connecting Utilities

Water: Inlet hoses (blue for cold, red for hot). Drain: Hose to standpipe or sink. Power: Grounded socket.

  1. Ensure water taps are off before connecting hoses.
  2. Use only provided hoses; do not reuse old ones.
  3. Drain hose must not be higher than 100 cm from floor.
  4. Plug directly into wall socket; avoid extension cords.

Tip: Check for leaks after first connection by running a short cycle.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (prewash), II (main wash), * (fabric softener).
  3. Select program: Turn knob to desired program (e.g., Cotton for linens).
  4. Adjust settings: Use TEMP, SPIN, and option buttons as needed.
  5. Start: Press START/PAUSE; door locks automatically.
  6. After cycle: Remove laundry promptly; leave door ajar to dry drum.
  7. Delay Start: Press DELAY to set start time (1-24h).

WARNING! Do not wash items contaminated with flammable substances. Remove coins, keys from pockets.

Safety Features

Child Lock: Locks control panel (activate with DELAY + TEMP). Door Lock: Automatically during cycle; unlocks at end. Anti-Flood: Stops water if leak detected. Imbalance Control: Reduces spin speed if load uneven.

Care & Cleaning

Unplug before cleaning. Monthly maintenance:

  1. Clean detergent drawer: Remove and rinse under warm water.
  2. Clean door seal: Wipe with damp cloth to remove residue.
  3. Run drum clean cycle: Use "Drum Clean" program or hot wash without laundry.
  4. Check drain filter: Turn off machine, open filter cover at front, clean filter.

CAUTION! Do not use abrasive cleaners or solvents. Keep area around machine dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016 and EU Ecodesign Directive. CE marked. Waste Electrical and Electronic Equipment (WEEE) regulations apply; dispose of properly. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/doorCheck plug; ensure door closed properly; press START/PAUSE.
No water intakeTaps/hosesEnsure taps on; check hoses for kinks; clean inlet filter.
Water does not drainDrain hose/filterCheck hose for blockages; clean drain filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet to level machine.
Error codes on displayVarious faultsRefer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine NSWM 743U GG UK N manual © - All Rights Reserved 2025