Hotpoint Washing Machine NSWM 743U GG UK Manual

The Hotpoint NSWM 743U GG is a freestanding 7kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, direct injection motor, LED display, delay start, and child lock. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, LED control panel, detergent dispenser, filter, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Anti-Stain Technology	Automatic stain removal for common stains
Direct Injection Motor	Quiet and efficient operation
LED Display	Shows time remaining, cycle stage, and settings
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
Quick Wash	30-minute cycle for lightly soiled loads
Spin Speed Reduction	Option to reduce spin speed for delicate items
Extra Rinse	Additional rinse cycle option
Drum Clean	Special program to clean the drum
Energy Rating	A+++ for high energy efficiency

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue) and hot if available (red).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust front feet to ensure machine is stable.
Plug into grounded power socket.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run a drum clean cycle before first wash.

Run drum clean: Select Drum Clean program and press start.
Load detergent: Fill detergent dispenser compartments as needed.
Select program: Turn program dial to desired wash cycle.
Adjust settings: Use option buttons for temperature, spin speed, etc.
Start cycle: Press Start/Pause button.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Capacity: 7kg (cotton).
Energy Rating: A+++.
Spin Speed: 1400 RPM maximum.
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Drum Clean, etc.
Water Pressure: 0.5 - 8 bar.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Noise Level: 74 dB (washing), 76 dB (spinning).
Weight: 68 kg.

Controls and Settings

Control Panel: Program dial, LED display, Start/Pause, Option buttons (Temperature, Spin, Delay, Extra Rinse).

Program Dial: Select from Cotton (40°C, 60°C, 90°C), Synthetic, Delicate, Wool, Quick Wash (30 min), Drum Clean, etc.

Options: Temperature (cold to 90°C), Spin Speed (0-1400 RPM), Delay Start (1-24 hrs), Extra Rinse (on/off). Display: Shows time remaining, cycle stage, selected options. Child Lock: Press and hold Delay and Spin buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold tap; red to hot if available. Drain: Place hose in standpipe (max height 100 cm).

Turn off water taps before connecting hoses.
Use only supplied hoses; do not overtighten.
Ensure drain hose is not kinked and is securely placed.
Check for leaks after first connection.

Tip: Use drain hose support if provided to prevent slipping.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load items evenly, close door securely.
Add detergent: Pour into main wash compartment (II); pre-wash if needed (I).
Select program: Turn dial (e.g., Cotton 60°C for mixed colors).
Adjust options: Press Temperature, Spin, etc., to customize.
Start: Press Start/Pause; machine will fill, wash, rinse, spin.
Pause: Press Start/Pause to pause; press again to resume.
End of cycle: Door locks until safe; unlock symbol appears.

WARNING! Do not overload drum. Balance load to prevent vibration.

Special Functions

Anti-Stain: Automatically adjusts cycle for stains like wine, grass, grease. Delay Start: Set start time up to 24 hours later. Child Lock: Locks controls during cycle. Drum Clean: Run monthly with detergent to maintain hygiene.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run Drum Clean program regularly; check filter for debris.

CAUTION! Do not use abrasive cleaners. Keep area around machine dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Energy label according to EU regulations. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in; ensure door is closed properly; press Start.
No water intake	Taps/hoses	Ensure taps are on; check hoses for kinks; clean inlet filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load evenly.
Water not draining	Drain hose/filter	Check drain hose is not blocked; clean pump filter.
Error codes on display	Various faults	Refer to manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then restart.

Service: 03448 113 113; www.hotpoint.co.uk