Hotpoint washing machine NSWM 743U BS UK manual

The Hotpoint NSWM 743U BS is a 7kg capacity freestanding washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs including Eco 40-60, Cotton, Synthetics, Delicates, and Quick Wash. It features a digital display, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, Digital display, Program selector knob, Door with safety lock, Detergent drawer, Adjustable feet, Mains power cable, Water inlet hoses, Drain hose.

FeatureDescription
Capacity7kg (dry laundry weight)
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 RPM
DisplayDigital with time remaining and status icons
Programs14 programs including Eco 40-60, Cotton, Quick 30'
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodAquaStop protection system
Door LockSafety lock during operation
Adjustable FeetFor levelling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
  3. Connect drain hose: Place into standpipe or sink (max height 100cm).
  4. Level the machine: Adjust front feet using spanner until machine is stable.
  5. Plug into a grounded 220-240V AC, 50Hz power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press the power button.
  2. Run empty wash: Select the "Drum Clean" program (or a 90°C cotton cycle) without laundry and with a little detergent.
  3. Set preferences: Use the control knob and buttons to set clock time, default spin speed, etc.
  4. Load laundry: Do not exceed 7kg; separate colours and fabrics.
  5. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Ensure all packaging is removed and hoses are securely connected to avoid leaks.

Specifications

Controls and Settings

Access controls via the front panel. Control Knob: Selects wash programs. Buttons: Power On/Off, Start/Pause, Delay Timer, Spin Speed, Temperature, Extra Rinse, Child Lock.

Display: Shows time remaining, selected options, and error codes.

Program Selection: Turn knob to desired program (e.g., Cotton 40°C). Option Buttons: Press to modify spin speed, temperature, or add Extra Rinse. Delay Timer: Press to delay start (1-24 hours). Child Lock: Press and hold for 3 seconds to activate/deactivate (prevents changes during cycle).

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Hose into standpipe or sink.

  1. Ensure water taps are off before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Secure drain hose to prevent slipping (use supplied U-bend if needed).
  4. Check for leaks by turning on taps briefly before first use.

Tip: The drain hose should not be higher than 100cm from the floor to ensure proper drainage.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Select program: Turn knob (e.g., "Cotton" for cottons and linens).
  2. Adjust settings: Press Temperature, Spin Speed buttons as needed.
  3. Add options: Press Extra Rinse for sensitive skin or heavy detergent.
  4. Set delay: Press Delay Timer to start later.
  5. Start: Close door, press Start/Pause. The door locks and cycle begins.
  6. Pause/change: Press Start/Pause to stop; wait for door unlock symbol before opening.
  7. End of cycle: Machine beeps; "End" appears. Wait for door to unlock (may take minutes).

WARNING! Do not open door during wash or spin; wait until unlocked. Overloading can cause poor wash results and damage.

Special Features

Eco 40-60: Energy-efficient program for normally soiled cotton at 40°C or 60°C. Quick 30': Fast wash for lightly soiled items. Delay Timer: Start cycle up to 24 hours later. Child Lock: Locks controls during operation. Anti-Flood: AquaStop detects leaks and stops water supply.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run "Drum Clean" program every 30 cycles. Wipe door seal and glass to remove lint and residue.

CAUTION! Do not use abrasive cleaners or solvents. Keep the filter clean to prevent blockages.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016 and EU Ecodesign Directive. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 0333 305 3514.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower, door, child lockCheck plug and power; ensure door closed properly; deactivate child lock.
No water intakeTaps, hoses, filterEnsure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose, pump filterCheck drain hose is not too high or blocked; clean pump filter.
Excessive vibration/noiseTransit bolts, levelling, loadEnsure transit bolts removed; re-level machine; redistribute unbalanced load.
Error code on displayVarious faultsConsult manual error code list (e.g., F01 = water inlet fault). Unplug for 5 minutes, then retry.
Poor wash resultsDetergent, load, programUse correct detergent amount; do not overload; select suitable program and temperature.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 3514; www.hotpoint.co.uk

Hotpoint washing machine NSWM 743U BS UK manual © - All Rights Reserved 2025