Hotpoint washing machine NSWM 1045C BS UK N manual

The Hotpoint NSWM 1045C BS UK N is a freestanding washing machine with a 10kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features multiple wash programs, electronic controls, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent drawer, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	10kg load capacity for large households
Energy Rating	A+++ for high energy efficiency
Spin Speed	1400 RPM for effective drying
Programs	15 wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours delay timer
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection against leaks
Display	LED digital display with time remaining
Door	Reversible door for flexible installation
Dimensions	H85 x W60 x D60 cm (approx)

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water supply: Attach inlet hoses to hot/cold taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

Check connections: Ensure water taps are on and hoses secure.
Load detergent: Fill drawer with powder/liquid as per instructions.
Select program: Choose Cotton 90°C without laundry.
Start: Press Start/Pause to begin; let cycle complete.
Set preferences: Adjust default spin speed, temperature if needed.

CAUTION! First wash may contain residual water; this is normal.

Specifications

Model: NSWM 1045C BS UK N
Capacity: 10kg
Energy Class: A+++
Spin Speed: 1400 RPM
Programs: 15 including Eco, Wool, Hand Wash, Sport
Water Pressure: 0.5-10 bar
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): 85x60x60 cm
Weight: 70kg
Noise Level: Wash 53 dB, Spin 75 dB

Controls and Settings

Control Panel: Power button, Program selector knob, Temperature button, Spin speed button, Delay Start, Start/Pause, Child Lock.

Programs: Cotton (40°C-90°C), Synthetics (30°C-60°C), Delicates (cold-40°C), Quick Wash (30°C), Eco 40-60, Wool, Hand Wash, Sport, Daily, Intensive, Rinse & Spin, Drain Only.

Settings: Temperature adjustment (cold to 90°C), Spin speed (0-1400 RPM), Delay Start (1-24h), Child Lock (press 3 sec). Display shows time remaining, cycle stage, and options.

Connecting Water & Drain

Water Inlet: Two hoses (hot/cold) with filters. Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect blue hose to cold tap, red to hot (if available).
Secure drain hose at 60-100 cm height; avoid kinks.
Check for leaks after first use.

Tip: Use only genuine Hotpoint hoses; replace every 5 years.

Using Wash Programs

Follow fabric care labels; sort by colour and fabric type.

Load laundry: Do not exceed 10kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Adjust settings: Press Temp/Spin buttons as needed.
Delay Start: Press Delay to set hours (LED shows).
Start: Press Start/Pause; door locks automatically.
End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during wash; wait for unlock signal.

Safety Features

Child Lock: Press 3 sec to activate/deactivate; locks controls. Anti-Flood: AquaStop shuts off water if leak detected. Door Lock: Automatic during operation. Overload Protection: Reduces spin speed if unbalanced.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Unplug machine before cleaning.
Wipe exterior with damp cloth; no abrasive cleaners.
Run drum clean cycle monthly: Use proprietary cleaner or 90°C cotton program empty.
Clean filter: Open flap at front, unscrew filter, clear debris.

CAUTION! Do not use steam cleaners; keep ventilation openings clear.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016, WEEE Directive. CE marked. Energy label according to EU 2019/2014. Manufactured for UK market. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug, fuse; ensure door closed properly.
No water intake	Taps/hoses	Open taps; check hose kinks; clean inlet filters.
Water doesn't drain	Drain hose/filter	Check hose height; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry.
Error codes (e.g., F01)	Fault	Consult manual; unplug for 5 min, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk