Hotpoint washing machine NSWM 1043C W UK N manual

The Hotpoint NSWM 1043C W UK N is a freestanding washing machine with a 10kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features multiple wash programs, electronic controls, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on standard 220-240V, 50Hz power. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent drawer, drum, door seal, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	10kg load capacity for large households
Energy Rating	A+++ for high energy efficiency
Spin Speed	Up to 1400 RPM for faster drying
Programs	Multiple wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop technology to prevent leaks
Display	LED digital display with time remaining
Door	Large porthole door with safety lock
Dimensions	H85 x W60 x D60 cm (approx.)

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4” thread). Ensure washers are fitted.
Connect drain hose: Place into standpipe or sink; secure with hook if provided.
Level the machine: Adjust front feet using spanner until machine is stable.
Plug into grounded power socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and run a maintenance wash before first use.

Power on: Press POWER button; display will light up.
Run initial wash: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use OPTIONS button to set beeper volume, end signal.
Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Ensure packaging materials are fully removed. Check for water leaks during first cycle.

Specifications

Model: NSWM 1043C W UK N
Capacity: 10kg
Energy Class: A+++
Spin Speed: 1400 RPM (adjustable)
Water Pressure: 0.5 - 10 bar
Programs: 15+ including Eco, Wool, Sport, Anti-Allergy
Noise Level: 53 dB (washing), 75 dB (spinning)
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70 kg

Controls and Settings

Control Panel: POWER, PROGRAM selector knob, START/PAUSE, OPTIONS, DELAY START, CHILD LOCK.

Programs: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (cold-40°C), Quick Wash (30°C), Wool, Silk, Sport, Anti-Allergy, Drum Clean.

Options: Extra Rinse, Pre-wash, Intensive, Easy Iron, Speed Wash. Settings: Delay Start (1-24h), Child Lock (press 3 sec), Temperature selection, Spin speed selection (400-1400 RPM).

Connecting Water & Drain

Water Inlet: Cold fill only. Drain: To standpipe or sink.

Turn off water tap before connecting hose.
Connect inlet hose to machine first, then to tap. Do not overtighten.
Place drain hose in standpipe (min 60cm height) or over sink edge.
Ensure no kinks in hoses.

Tip: Use only provided hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 10kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Adjust options: Press OPTIONS for Extra Rinse, Temperature, Spin speed.
Start: Press START/PAUSE; door locks automatically.
Delay Start: Press DELAY START to set start time.
End of cycle: Machine beeps; door unlocks after short delay.

WARNING! Do not open door during wash; wait for unlock signal. Remove items promptly to avoid wrinkles.

Safety Features

Child Lock: Press and hold 3 seconds to lock controls. Door Safety Lock: Door locks during wash; cannot be opened until safe. Anti-Flood: AquaStop detects leaks and stops water. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Clean drawer: Pull out, wash under warm water.
Clean seal: Wipe with damp cloth to remove lint.
Clean filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean.
Run Drum Clean program monthly with dedicated cleaner.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug/socket; press START.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water not draining	Drain blocked/pump filter	Check drain hose; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level feet.
Error codes (E01-E10)	Various faults	Consult manual error code list; reset by unplugging.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk