Hotpoint washing machine NSWM 1043C W UK manual

The Hotpoint NSWM 1043C W is a freestanding 10kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs including Eco 40-60, Cotton, Synthetics, Delicates, Wool, and Quick Wash. Features include a digital display, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10kg drum, digital control panel, detergent drawer, filter access, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Capacity	10kg maximum load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Digital Display	Shows time remaining, program, and settings
Delay Timer	Delay start up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop technology for leak prevention
Detergent Drawer	Compartments for pre-wash, main wash, softener
Quick Wash	30-minute program for lightly soiled items
Eco 40-60	Energy-efficient program for 40°C and 60°C washes

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust feet using spanner; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure hoses are secure and machine is level.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use control dial and buttons to set language, time, etc.
Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Do not use machine without removing transit bolts.

Specifications

Model: NSWM 1043C W UK
Capacity: 10kg
Energy Class: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5 - 8 bar
Programs: Eco 40-60, Cotton, Synthetics, Delicates, Wool, Quick Wash, Drum Clean
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)

Controls and Settings

Control Panel: Program dial, Start/Pause button, Delay button, Option buttons, Child Lock button.

Program Dial: Select wash programs (Cotton, Synthetics, Delicates, etc.).

Options: Temperature selection (cold to 90°C), Spin speed (0-1400 RPM), Extra Rinse, Pre-wash. Delay Timer: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold for 3 seconds to lock/unlock controls. Display: Shows program duration, time remaining, selected options.

Connecting Water & Drain

Water Inlet: Cold fill only (blue hose). Drain: Standpipe or sink.

Turn off water supply before connecting hoses.
Connect inlet hose to cold tap; ensure washers are fitted.
Place drain hose in standpipe (max height 100cm) or secure over sink edge.
Check for leaks after first connection.

Tip: Do not kink hoses; ensure drain hose is not submerged.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 10kg; distribute evenly.
Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn dial to desired program (e.g., Cotton for cottons).
Set options: Adjust temperature, spin speed, extra rinse if needed.
Start: Press START/PAUSE; display shows time remaining.
After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash waterproof items; check pockets for objects.

Safety Features

Child Lock: Locks controls to prevent changes. Anti-Flood: AquaStop detects leaks and stops water. Door Lock: Door locks during wash; unlocks at end or if paused. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Regular maintenance ensures performance.

Clean detergent drawer: Remove monthly; wash with warm water.
Clean filter: Turn off machine; open filter cover at front; drain water; remove debris.
Clean drum: Run Drum Clean program monthly or use washing machine cleaner.
Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use harsh chemicals.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Energy label according to EU regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Copyright © Hotpoint. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in; ensure door is closed properly; press Start.
No water entering	Taps/hoses	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check drain hose is not blocked; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes on display	Various faults	Consult manual for code meaning; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk