Hotpoint washing machine NSWF 743U W UK N manual

The Hotpoint NSWF 743U W UK N is a freestanding 7kg washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, direct injection motor, LED display, delay start, and child lock. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum capacity, LED control panel, detergent dispenser, filter access, adjustable feet, water inlet hoses, drain hose.

FeatureDescription
Anti-Stain TechnologyAutomatic stain removal for common stains
Direct Injection MotorQuiet and efficient operation with 10-year warranty
LED DisplayShows time remaining, program, and settings
Delay StartProgram start delay up to 24 hours
Child LockLocks control panel during operation
Quick Wash30-minute wash for lightly soiled loads
Spin Speed ReductionOption to reduce spin speed for delicate items
Extra RinseAdditional rinse cycle for sensitive skin
Drum CleanSpecial program to clean the drum
Energy RatingA+++ for high energy efficiency

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (blue for cold, red for hot).
  3. Connect drain hose: Place in standpipe or sink; use U-bend hook if provided.
  4. Level the machine: Adjust front feet using spanner; use spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

  1. Set water hardness: In settings menu, select based on local water hardness.
  2. Run drum clean: Select Drum Clean program without laundry to remove residues.
  3. Load detergent: Fill detergent dispenser compartments as per instructions.
  4. Select program: Turn dial to desired wash program.
  5. Start: Press Start/Pause button.

CAUTION! Ensure packaging is fully removed. Keep children away during installation.

Specifications

Controls and Settings

Control Panel: Program dial, LED display, Start/Pause, Option buttons.

Program Dial: Select from Cotton, Synthetic, Delicate, Wool, Quick Wash (30 min), Anti-Stain, Rinse+Spin, Spin Only, Drum Clean.

Options: Delay Start (1-24h), Extra Rinse, Spin Speed Reduction, Pre-Wash, Child Lock (press and hold for 3 seconds). Settings Menu: Access by pressing two buttons simultaneously; set water hardness, buzzer volume, end-of-cycle signal.

Connecting Water & Drain

Water Inlet: Two hoses (hot/cold). Drain: Hose to standpipe or sink.

  1. Turn off taps before connecting hoses.
  2. Connect blue hose to cold tap, red to hot (if using both).
  3. Secure drain hose in standpipe (max height 100cm) or over sink edge.
  4. Check for leaks after first connection.

Tip: Use hose clips provided. Do not kink hoses.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Do not overload; distribute evenly.
  2. Add detergent: Use compartments I (pre-wash), II (main wash), * (fabric softener).
  3. Select program: Turn dial (e.g., Cotton for normal loads).
  4. Set options: Press Extra Rinse, Delay Start, etc.
  5. Start: Press Start/Pause; LED shows time remaining.
  6. Pause: Press Start/Pause to pause; press again to resume.
  7. End of cycle: Buzzer sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes. Check pockets for objects.

Special Functions

Anti-Stain: Select program; machine detects stain type and adjusts. Delay Start: Set 1-24 hours. Child Lock: Press and hold Child Lock button for 3 seconds. Drum Clean: Run monthly without laundry at 90°C.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean filter every 2-3 months; turn off water, place towel, open filter cover, drain residual water, remove and clean filter.

CAUTION! Do not use abrasive cleaners. Keep filter area dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug; ensure door closed properly; press Start/Pause.
No water intakeTaps/hosesEnsure taps on; check hoses for kinks; clean inlet filter.
Water not drainingDrain hose/filterCheck drain hose height; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; re-level machine; redistribute load.
Error codes (e.g., F01)Various faultsConsult manual; unplug for 5 minutes; if persists, call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine NSWF 743U W UK N manual © - All Rights Reserved 2025