Hotpoint washing machine NSWE 845C WS UK N manual

The Hotpoint NSWE 845C WS UK N is a freestanding washing machine with an 8kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, and various safety systems. Designed for UK household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, LED display, detergent dispenser, drum, filter, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Capacity	8kg (dry laundry)
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Programs	Cotton, Synthetic, Delicate, Quick Wash, Wool, etc.
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Digital Display	Shows time remaining, cycle stage, settings
Adjustable Feet	For levelling on uneven floors
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Door Lock	Safety lock during operation

Installation

Unpack and remove transit bolts. Place on stable, level floor near water/drain points.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into grounded power socket.

WARNING! Do not install in areas prone to freezing. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run a maintenance wash before first laundry load.

Check connections: Ensure hoses are secure and not kinked.
Run empty wash: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use control dial and buttons to set default options if needed.
Load detergent: Fill dispenser compartments according to detergent instructions.

CAUTION! Ensure machine is level to prevent excessive vibration.

Specifications

Model: NSWE 845C WS UK N
Capacity: 8kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Pressure: 0.5 - 10 bar
Programs: 15+ including Eco, Quick, Anti-Allergy
Dimensions (HxWxD): 85 x 60 x 60 cm (approx)
Power Supply: 220-240V, 50Hz
Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (e.g., Extra Rinse, Delay), Display.

Program Dial: Select wash program (Cotton, Synthetic, Delicate, Wool, etc.). Options: Spin speed reduction, Pre-wash, Delay start, Child lock (press and hold for 3 sec). Display: Shows time, cycle stage, selected options.

Settings: Adjust spin speed (400-1400 RPM), temperature (cold to 90°C), delay start (1-24h). Child lock activated via button combination.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Use only supplied hoses; do not overtighten.
Ensure drain hose is secured and not submerged.
Check for leaks after first connection.

Tip: Use hose clips if provided. Ensure drain hose loop is above 60cm to prevent siphoning.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by colour and fabric type.
Load machine: Do not overload; distribute evenly.
Add detergent: Use dispenser compartments as directed.
Select program: Turn dial to desired program (e.g., Cotton for cottons).
Set options: Adjust temperature, spin speed, extra rinse if needed.
Start: Press Start/Pause; door locks automatically.
After cycle: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during wash; wait for unlock signal. Remove coins/objects from pockets.

Safety Features

Child Lock: Prevents program changes; activate via control panel. Door Lock: Auto-locks during wash; unlocks at end. Overflow Protection: Auto shut-off if excess water detected. Imbalance Control: Reduces spin speed if load uneven.

Care & Cleaning

Unplug before maintenance. Clean detergent dispenser monthly; run drum clean program every 30 cycles. Check filter periodically for blockages.

CAUTION! Do not use abrasive cleaners. Empty filter with towel to catch residual water.

Regulatory Information

Complies with UK/EU safety standards. CE marked. Waste electrical products must not be disposed of with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 247 365.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door shut firmly; check plug/socket; press Start.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/level	Ensure transit bolts removed; re-level machine; redistribute load.
Water not draining	Drain blocked	Check drain hose for kinks/blockage; clean pump filter.
Error codes on display	Various faults	Consult manual for code meaning; try reset (unplug for 5 min).

Reset: Unplug for 5 minutes, then restart.

Service: 03448 247 365; www.hotpoint.co.uk