Hotpoint washing machine NSWE 745C WS UK manual

The Hotpoint NSWE 745C WS is a freestanding 7kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs including Cotton, Synthetic, Delicates, Wool, and Quick Wash. It features a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 7kg drum, Digital display, Program selector knob, Door with safety lock, Detergent drawer, Water inlet hoses, Drain hose, Adjustable feet.

Installation

Unpack and remove transit bolts. Place on stable, level floor near water and drain points.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine inlet.
3. Connect drain hose: Place hose into standpipe or sink (max height 100cm).
4. Level the machine: Adjust feet using spanner; ensure machine does not rock.
5. Plug into 230V AC power socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before first use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on: Plug in and press Power button.
2. Run empty wash: Select "Drum Clean" program at 90°C without detergent.
3. Set preferences: Use Settings button to adjust buzzer volume, end-of-cycle signal.
4. Load detergent: Fill drawer compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Ensure packaging materials and transit bolts are fully removed. Keep children away during installation.

Specifications

• Model: NSWE 745C WS UK
• Capacity: 7kg
• Energy Class: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 9,000 litres per year
• Spin Speed: 1400 RPM
• Noise Level (wash/spin): 53/76 dB(A)
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Weight: 68 kg
• Mains Supply: 230V~50Hz
• Max Inlet Pressure: 1 MPa (10 bar)
• Min Inlet Pressure: 0.05 MPa (0.5 bar)

Controls and Settings

Control Panel: POWER button, Program selector knob, Display, START/PAUSE, Delay Start, Options buttons (Extra Rinse, Speed Wash, etc.).

Programs: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicates, Wool, Silk, Quick 15', Eco 40-60, Drum Clean, Sport, Jeans, Mix, Outdoor, Spin & Drain, Rinse.

Settings Menu: Press and hold Settings button to access buzzer volume, end signal, child lock default. Options: Extra Rinse (adds rinse cycle), Speed Wash (reduces time), Night Mode (quieter spin).

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water tap. Drain: Place hose securely into standpipe (not submerged).

1. Turn off water tap before connecting hoses.
2. Use only supplied hoses; do not reuse old hoses.
3. Ensure drain hose is not kinked and is at correct height (60-100 cm from floor).
4. Check for leaks after first connection.

Tip: Use AquaStop hose (red) for additional flood protection; replace if damaged.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Use drawer compartments I, II, * as needed.
3. Select program: Turn knob to desired program (e.g., Cotton 40°C).
4. Set options: Press Extra Rinse, Speed Wash if required.
5. Delay Start: Press Delay button to set start time (up to 24h).
6. Start: Press START/PAUSE; door locks and cycle begins.
7. End of cycle: Buzzer sounds; door unlocks after a short delay.

WARNING! Do not open door during wash; wait for unlock symbol. Remove laundry promptly after cycle to avoid wrinkles.

Special Functions

Child Lock: Press and hold Child Lock button for 3 seconds to lock controls; repeat to unlock. Anti-Crease: Keeps drum turning periodically after cycle to reduce wrinkles. Pause & Add: Press START/PAUSE to stop; door unlocks after 2 minutes to add forgotten items.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

1. Detergent drawer: Pull out, rinse under warm water.
2. Door seal: Wipe with damp cloth to remove lint and residue.
3. Filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter cap; clean under running water.
4. Run Drum Clean program monthly without laundry.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on door or display.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 0333 305 2263. Hotpoint is a trademark of Whirlpool Corporation.

Troubleshooting

Reset: Unplug for 1 minute, then restart.

Service: 0333 305 2263; www.hotpoint.co.uk