Hotpoint washing machine NSWE 743U WS UK manual

The Hotpoint NSWE 743U WS is a freestanding 7kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programmes. It features a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, Digital display, Programme selector knob, Door with safety lock, Detergent dispenser, Adjustable feet, Water inlet hoses, Drain hose.

Feature	Description
Capacity	7kg (dry laundry weight)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Digital Display	Shows time remaining, programme stage, and settings
Programmes	15 programmes including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental changes to settings
Anti-Flood Protection	AquaStop™ technology
Door Lock	Safety lock during operation
Adjustable Feet	For levelling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine inlet.
Connect drain hose: Place in standpipe, sink, or hook over edge (max height 100cm).
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into a grounded 230V AC power socket.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure and leak-free.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" programme without laundry.
Set clock: Press and hold CLOCK button, use +/- to set correct time.
Load detergent: Fill dispenser compartments as per detergent instructions.
Select programme: Turn knob to desired programme; press START/PAUSE.

CAUTION! Ensure transit bolts are removed. Do not overload the drum.

Specifications

Model: NSWE 743U WS UK
Capacity: 7kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 litres per cycle (Cotton 60°C)
Spin Speed: 1400 RPM (max)
Noise Level: 53 dB (washing), 73 dB (spinning)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 68 kg
Power Supply: 230V AC, 50Hz
Water Pressure: 0.5 - 10 bar

Controls and Settings

Control Panel: POWER button, Programme selector knob, Digital display, START/PAUSE, Delay Start, Spin Speed, Temperature, Extra Rinse, Child Lock buttons.

Display Icons: Time remaining, Programme stage, Child Lock, Delay Start, Spin Speed, Temperature.

Programmes: Cotton (20°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Quick Wash (14 mins), Sport, Jeans, Anti-Allergy, Drum Clean, Rinse & Spin, Spin Only, Drain. Settings: Adjust temperature (cold to 90°C), spin speed (400-1400 RPM or No Spin), add Extra Rinse, set Delay Start (1-24 hours).

Connecting Water & Drain

Water Inlet: Connect blue-marked hose to cold water tap. Drain: Place hose securely.

Turn off water tap before connecting hoses.
Ensure inlet hose filters are clean and washers are in place.
Drain hose must not be kinked or submerged.
Check for leaks after first connection.

Tip: Use only provided hoses; do not extend or replace with non-genuine parts.

Using Wash Programmes

Supports various fabrics and soil levels.

Sort laundry: Separate by colour, fabric type, and care labels.
Load drum: Do not overload; items should move freely.
Add detergent: Use compartment I (pre-wash), II (main wash), * (fabric softener).
Select programme: Turn knob; adjust temperature/spin if needed.
Optional settings: Press Delay Start, Extra Rinse, etc.
Start: Press START/PAUSE; door locks and cycle begins.
Pause/Stop: Press START/PAUSE to pause; turn knob to reset to stop.
End of cycle: "End" appears; door unlocks after a few minutes.

WARNING! Do not open door during wash; hot water risk. Remove items promptly after cycle to prevent odours.

Safety Features

Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate. Anti-Flood: AquaStop™ detects leaks and stops water supply. Door Lock: Automatically locks during operation; unlocks at end of cycle or after power failure.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run Drum Clean programme every 40 cycles.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016 and EU Ecodesign Directive. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 0333 305 3514.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug is switched on; ensure door is properly closed.
No water intake	Taps/hoses/filters	Ensure taps are on; check hoses for kinks; clean inlet filters.
Water does not drain	Drain hose/filter	Check drain hose is not kinked or blocked; clean pump filter.
Excessive vibration/noise	Transit bolts/levelling/load	Ensure transit bolts removed; re-level machine; redistribute load evenly.
Error codes (e.g., F01, F05)	Fault detected	Consult manual error code list; unplug for 5 minutes, then retry.
Detergent not dispensed	Dispenser blocked	Clean dispenser drawer under running water.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 3514; www.hotpoint.co.uk