Hotpoint washing machine NSWA 945C WW UK N manual

The Hotpoint NSWA 945C WW UK N is a 9kg capacity front-loading washing machine with energy rating A+++, 1400 RPM spin speed, multiple wash programs including Eco, Cotton, Synthetics, Delicates, Wool, and Quick Wash, delay timer, child lock, and anti-flood protection. It features a digital display, rotary program selector, and Hotpoint's Anti-Stain technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum, Digital Display, Rotary Program Selector, Detergent Drawer, Door Handle, Adjustable Feet, Water Inlet Valves, Drain Hose.

FeatureDescription
Capacity9kg (dry laundry weight)
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
Programs15 programs including Eco 40-60, Cotton, Synthetics, Delicates
DisplayDigital display with time remaining, cycle stage, and options
Delay TimerUp to 24 hours delay start
Child LockLocks controls during operation
Anti-Flood ProtectionAquaStop technology to prevent water leaks
Anti-Stain TechnologyAutomatic stain removal for common stains
Quick Wash30-minute cycle for lightly soiled loads

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level.
  3. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
  4. Connect drain hose: Place in standpipe or sink; secure with hook.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before use.

First-Time Setup

Plug in machine; follow initial setup steps.

  1. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  2. Set language: Press and hold Start/Pause and Option buttons for 3 seconds to select language.
  3. Load detergent: Fill drawer compartments with recommended detergent.
  4. Select program: Turn selector to desired program.
  5. Start cycle: Press Start/Pause.

CAUTION! Ensure machine is level to prevent vibration and noise.

Specifications

Controls and Settings

Access controls via Rotary Selector and button panel. Display: Shows time, cycle stage, options.

Buttons: Start/Pause, Option (for extra rinse, pre-wash, etc.), Delay, Spin Speed, Temperature.

Programs: Select with rotary knob. Options: Extra Rinse, Pre-Wash, Easy Iron, Rapid. Settings: Child Lock (press and hold Start/Pause and Delay for 3 seconds), Reset (unplug for 1 minute).

Connecting Utilities

Water: Connect inlet hoses to taps (red for hot, blue for cold). Drain: Place hose in standpipe (max height 100cm). Power: Use grounded socket.

  1. Turn off water taps before connecting hoses.
  2. Ensure drain hose is not kinked.
  3. Plug directly into wall socket; avoid extension cords.

Tip: Check for leaks after first connection.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Open door, load evenly, close firmly.
  2. Add detergent: Use drawer (I: pre-wash, II: main wash, *: softener).
  3. Select program: Turn knob (e.g., Cotton for cottons).
  4. Adjust options: Press Temperature, Spin, Option buttons as needed.
  5. Set delay: Press Delay to set start time (up to 24h).
  6. Start: Press Start/Pause; display shows time remaining.
  7. Pause: Press Start/Pause to pause; press again to resume.
  8. End of cycle: Machine beeps; door unlocks after a few minutes.

WARNING! Do not overload drum. Balance load to reduce vibration.

Special Features

Anti-Stain Technology: Select Anti-Stain program for automatic stain removal. Child Lock: Locks controls during wash. Delay Start: Set wash to start later. Quick Wash: 30-minute cycle for small, lightly soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run Drum Clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners. Keep area around machine dry.

Regulatory Information

CE marked; complies with EU directives. Energy label A+++. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check power plug; press Start/Pause.
No water intakeTaps closed/hose kinkedOpen water taps; check hose for kinks; clean filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet to level.
Water not drainingDrain hose blockedCheck hose for blockages; clean pump filter.
Error codes on displayVarious faultsRefer to manual error code list; unplug for 1 minute and retry.

Reset: Unplug for 1 minute, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine NSWA 945C WW UK N manual © - All Rights Reserved 2025