Hotpoint washing machine NSWA 943C WW UK manual

The Hotpoint NSWA 943C WW is a 9kg capacity freestanding washing machine with an A+++ energy rating, featuring 1400 RPM spin speed, multiple wash programmes including Eco 40-60, Quick Wash, and Delicates, direct injection technology, anti-allergy cycle, delay start, and child lock. It operates on a standard UK 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9kg drum, Electronic Control Dial, LED Display, Detergent Dispenser, Water Inlet Valves, Drain Pump Filter, Adjustable Feet, Power Cord.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to hot and/or cold taps (check washer requirements). Use new hoses; do not reuse old ones.
2. Connect drain hose: Place into standpipe, sink, or drain as per instructions. Ensure no kinks.
3. Level the machine: Adjust the feet using a spanner until the machine is stable and does not rock.
4. Plug into a grounded 3-pin socket. Ensure power is off during connection.

WARNING! Remove all transit bolts before first use. Failure to do so will cause severe damage. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run a maintenance wash to clear any residual water.

1. Power on the machine: Press the power button.
2. Run initial empty wash: Select the "Drum Clean" or "Cotton 90°C" programme without laundry and with a small amount of detergent. This removes manufacturing residues.
3. Set preferences: Use the control dial and option buttons to set default spin speed, temperature, etc.
4. Familiarise with display: Note the icons for cycle progress, child lock, and delay start.

CAUTION! Do not load laundry during the first maintenance wash. Ensure the drain hose is correctly installed to prevent flooding.

Specifications

• Model: NSWA 943C WW UK
• Capacity: 9kg
• Energy Rating: A+++
• Spin Speed: 1400 RPM (adjustable)
• Programmes: Eco 40-60, Cotton, Synthetic, Delicates, Wool, Quick Wash, Drum Clean, Anti-Allergy, Sport, Jeans.
• Water Supply: Cold fill (or hot & cold depending on model variant).
• Dimensions (HxWxD): Approx. 85cm x 60cm x 60cm.
• Power Supply: 220-240V, 50Hz.
• Noise Level: Wash: 53 dB, Spin: 74 dB.

Controls and Settings

Access functions via the Control Dial and Option Buttons next to the LED display.

Control Dial: Turn to select the desired wash programme.

Option Buttons: Temperature, Spin Speed, Delay Start, Extra Rinse, Pre-Wash, Start/Pause.

LED Display: Shows selected programme, time remaining, temperature, spin speed, and active options.

Settings: Temperature (Cold to 90°C), Spin Speed (0 to 1400 RPM), Delay Start (1-24 hrs). Child Lock: Press and hold specific buttons for 3 seconds (refer to manual).

Connecting Water & Drain

Correct plumbing is essential for safe operation.

1. Water Inlet: Connect the blue hose to the cold water tap and the red hose (if present) to the hot. Use the supplied hose washers.
2. Drain Hose: Secure the drain hose in a standpipe (height between 60cm and 100cm from floor) or over the edge of a sink using the U-bend holder.
3. Check for Leaks: After connections, turn on taps and check both inlet hoses and the drain pump area for any drips before first use.

Tip: Leave a small gap between the wall and the machine for hose movement and ventilation.

Using Wash Programmes

Select a programme suitable for the fabric type and soil level.

1. Load laundry: Open door, load items loosely without overfilling. Close door firmly.
2. Add detergent: Pour powder/liquid into the appropriate dispenser drawer compartment (Main Wash, Pre-Wash, Softener).
3. Select programme: Turn the dial (e.g., to "Cotton", "Synthetic", "Eco 40-60").
4. Adjust options: Press buttons to set temperature, spin speed, delay start, etc.
5. Start: Press the Start/Pause button. The door locks and the cycle begins.
6. At cycle end: The door unlocks after a short safety period. Remove laundry promptly.

WARNING! Do not force the door open during a cycle. Check pockets for coins and objects to avoid drum damage.

Special Features

Direct Injection: Ensures precise water levels for efficiency. Anti-Allergy Cycle: Uses higher temperature and extended rinsing to reduce allergens. Delay Start: Programme start delayed up to 24 hours for off-peak energy use. Child Lock: Locks the control panel during operation.

Care & Cleaning

Regular maintenance ensures longevity and performance.

1. Clean detergent drawer: Pull out, rinse under warm water, and dry before replacing.
2. Clean door seal: Wipe the rubber gasket to remove lint and residue. Leave the door ajar after use to dry.
3. Clean drain pump filter: Locate behind the kickplate. Place a towel, unscrew filter slowly to release residual water, clean, and refit.
4. Run Drum Clean: Monthly, use a dedicated cleaner or a 90°C cotton cycle with no laundry.

CAUTION! Always disconnect from power and water before cleaning filters. Do not use abrasive cleaners.

Regulatory Information

This appliance complies with relevant UK and EU safety, EMC, and environmental directives (e.g., Low Voltage Directive, Ecodesign Directive). The symbol of a crossed-out wheelie bin indicates separate collection for electrical waste (WEEE). For disposal, contact your local council. Hotpoint is a trademark of Haier Europe Trading S.r.L. For support, visit www.hotpoint.co.uk or contact 0333 305 3514.

Troubleshooting

Reset: Turn the machine off at the plug for 2 minutes, then restart.

Service: 0333 305 3514; www.hotpoint.co.uk. Do not attempt to repair the appliance yourself.