Hotpoint washing machine NSWA 1146 WW UK manual

The Hotpoint NSWA 1146 WW is a freestanding washing machine with a 6kg capacity, 1200 RPM spin speed, A+++ energy rating, and multiple wash programs. It features an LED display, delay timer, child lock, and quick wash options. Designed for UK households, it operates on a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, door, water inlet hoses, drain hose, adjustable feet.

Installation

Unpack and remove transit bolts. Place on solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (blue) and hot if needed (red).
3. Connect drain hose: Place in standpipe or sink; secure with U-bend.
4. Level the machine: Adjust feet using spanner; check with spirit level.
5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in machine; run initial empty wash.

1. Open detergent drawer: Add 1/2 cup of detergent to compartment II.
2. Select program: Turn dial to "Cotton 60°C".
3. Start cycle: Press Start/Pause; let complete to clean drum.
4. Set preferences: Use Settings button for buzzer volume, etc.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

• Model: NSWA 1146 WW
• Capacity: 6kg
• Spin Speed: 1200 RPM
• Energy Class: A+++
• Water Pressure: 0.5 - 10 bar
• Programs: 14 including Eco 40-60, Wool, Sport, Drum Clean
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Power Supply: 220-240V, 50Hz
• Max Load: 6kg dry weight
• Noise Level: 74 dB (spin)

Controls and Settings

Control Panel: Program dial, LED display, Start/Pause, Delay Start, Option buttons.

Program Dial: Select from 14 programs (Cotton, Synthetic, Delicates, Quick 15', etc.).

Options: Extra Rinse, Pre-wash, Speed Wash, Rinse Hold. Settings: Press and hold Settings button to adjust end buzzer (Off, Low, High), child lock. Display: Shows time remaining, cycle stage, door lock status.

Connecting Utilities

Water: Inlet hoses (cold/hot). Drain: Hose to standpipe. Power: Grounded socket.

1. Turn off water taps before connecting hoses.
2. Use only supplied hoses; do not overtighten.
3. Ensure drain hose is not kinked and is at correct height (60-100 cm).
4. Plug directly into wall; avoid extension cords.

Tip: Check for leaks after first connection by running a short cycle.

Using Wash Programs

Supports various fabrics and soil levels.

1. Load laundry: Do not exceed 6kg; distribute evenly.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
3. Select program: Turn dial (e.g., Cotton for towels/bedding).
4. Adjust options: Press Extra Rinse, Pre-wash, etc. as needed.
5. Start: Press Start/Pause; door locks automatically.
6. Delay start: Press Delay Start to set 1-24 hours.
7. End of cycle: Buzzer sounds; door unlocks after a few minutes.

WARNING! Do not open door during wash; wait for unlock indicator. Remove items promptly after cycle.

Safety Features

Child Lock: Press and hold Delay Start + Option 2 for 3 seconds to activate/deactivate. Door Lock: Automatic during operation; unlocks at end. Overflow protection: Auto shut-off if excess water detected.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Manufactured to EU ecodesign and energy labelling standards. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 1 minute, then restart.

Service: 03448 113 113; www.hotpoint.co.uk