Hotpoint Washing Machine NSWA 1044C WW UK N Manual

The Hotpoint NSWA 1044C WW UK N is a freestanding washing machine with a 10kg capacity, A+++ energy rating, 1400 rpm spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray pre-wash, delay start, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent dispenser, drum, filter, water inlet hoses, drain hose.

Feature	Description
Capacity	10kg load capacity
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Anti-Stain Technology	Automatic stain removal for common stains
Direct Spray	Pre-wash spray to loosen dirt
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
Quick Wash	30-minute cycle for lightly soiled loads
Allergy Care	Extra rinse and higher temperature for allergen removal
Digital Display	Shows time remaining, cycle stage, and error codes

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust front feet; use spirit level.
Plug into grounded power socket.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure machine is level, hoses secure, transit bolts removed.
Run empty wash: Select Cotton 90°C program without detergent to clean drum.
Set preferences: Use OPTIONS button to set beep volume, end signal, etc.
Load laundry: Do not exceed 10kg; mix large and small items.
Add detergent: Use dispenser drawers (I: pre-wash, II: main wash, *: fabric softener).

CAUTION! Overloading can cause poor wash results and damage. Use recommended detergent amounts.

Specifications

Model: NSWA 1044C WW UK N
Capacity: 10kg
Energy Class: A+++
Annual Energy Consumption: 175 kWh
Water Consumption: 10,200 litres per year
Spin Speed: 1400 rpm
Noise Level: 74 dB (wash), 76 dB (spin)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70 kg
Voltage: 220-240V, 50Hz
Max Load Power: 2300 W

Controls and Settings

Control Panel: Rotary selector, START/PAUSE, OPTIONS, Delay Start, Child Lock buttons.

Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Anti-Stain, Sport, Jeans, Allergy Care, Rinse & Spin, Drain.

Options: Extra Rinse, Pre-Wash, Reduced Creases, Speed Wash, Eco Mode. Settings: Temperature (cold to 90°C), Spin speed (0 to 1400 rpm), Delay Start (1-24 hours). Display: Shows time, temperature, spin speed, options selected, error codes.

Connecting Water & Drain

Water Inlet: Cold (mandatory) and hot (optional) hoses. Drain: Hose to standpipe or sink.

Turn off water taps before connecting hoses.
Connect hoses: Screw onto taps; hand-tighten plus quarter turn with pliers.
Drain hose: Insert into standpipe (max height 100 cm) or over sink edge.
Check for leaks: Run a short rinse cycle after installation.

Tip: Use hose clips if supplied. Do not kink hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Sort laundry: By colour, fabric, and soil level.
Load machine: Distribute evenly; do not overload.
Add detergent: Use drawer I for pre-wash, II for main wash.
Select program: Turn rotary selector.
Set options: Press OPTIONS for Extra Rinse, etc.
Start: Press START/PAUSE; door locks automatically.
Pause: Press START/PAUSE to add/remove items (if allowed).
End: Machine beeps; remove laundry promptly.

WARNING! Do not open door during high-temperature washes. Wait for drum to stop.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Press and hold Child Lock button for 3 seconds to lock/unlock controls. Anti-Stain: Select program; machine detects and treats stains automatically. Direct Spray: Pre-washes with sprayed water to loosen dirt.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, and filter.

Detergent drawer: Remove and rinse under tap.
Drum: Run empty Cotton 90°C cycle with washing machine cleaner.
Filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean.
Door seal: Wipe with damp cloth to remove lint.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle. For support, visit www.hotpoint.co.uk or contact 03448 113 113 (UK). Hotpoint is a trademark of Whirlpool Corporation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug socket; ensure Child Lock is off.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water leaks	Loose connections	Tighten hoses; check drain hose position.
Excessive vibration	Transit bolts not removed/uneven floor	Remove transit bolts; level machine; redistribute load.
Poor wash results	Overloading/wrong detergent	Reduce load; use correct detergent type and amount.
Error code on display	Various faults	Consult manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk