Hotpoint washing machine NR648GWSA IT manual

The Hotpoint NR648GWSA is a 6kg capacity front-loading washing machine with energy class A+++, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, child lock, and various fabric-specific cycles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Digital Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Adjustable Feet, Door Lock.

Feature	Description
Capacity	6 kg (dry laundry)
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Display	Digital with time remaining indicator
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Special Functions	Delay Start (up to 24h), Extra Rinse, Child Lock, Anti-Allergy
Door	Reversible (opens left or right)
Dimensions (HxWxD)	85 x 60 x 55 cm
Water Connection	Cold water only (hot fill optional)
Noise Level	Wash: 53 dB, Spin: 75 dB

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Positioning: Ensure at least 1 cm clearance from walls; adjust feet for stability.
Water Connection: Connect cold water hose (supplied) to tap; ensure tight fit.
Drain Hose: Place in standpipe (min 60 cm height) or sink hook; secure.
Electrical: Plug into grounded 220-240V, 50Hz outlet. Do not use extension cord.

WARNING! Remove all transit bolts before use. Do not install behind lockable door.

First-Time Setup

After installation, run an empty wash cycle to clean drum.

Remove transit bolts: Use spanner to remove 4 bolts at rear; store for future moves.
Level machine: Adjust front feet; use spirit level.
Connect water: Open tap fully; check for leaks.
First wash: Add 100 ml detergent, select "Cotton 90°C" program, run empty.
Set preferences: Use control dial to select language, time, etc.

CAUTION! Ensure water and drain connections are secure before first use.

Specifications

Model: NR648GWSA
Type: Front-loading automatic washing machine
Capacity: 6 kg
Energy Rating: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 litres per cycle (Cotton 60°C)
Spin Speed: 1400 RPM (adjustable)
Programs: 15 including Eco 40-60, Wool, Sport, Drum Clean
Dimensions: 85 cm (H) x 60 cm (W) x 55 cm (D)
Weight: 68 kg
Power Supply: 220-240V, 50Hz, 10A

Controls and Settings

Control Panel: Program Dial, Display, Temperature Button, Spin Speed Button, Start/Pause, Option Buttons.

Program Dial: Turn to select wash program (Cotton, Synthetics, Delicates, Quick 30', etc.).

Display: Shows time remaining, selected options, door lock status.

Buttons: Temperature (30°C to 90°C), Spin Speed (400 to 1400 RPM or Rinse Hold), Delay Start (1-24h), Extra Rinse, Child Lock.

Detergent Dispenser: Compartments for pre-wash (I), main wash (II), fabric softener (*).

Connecting Water & Drain

Water Inlet: Cold water only (hot fill optional with Y-piece). Drain: To standpipe or sink.

Turn off water tap before connecting hoses.
Attach inlet hose to machine (red collar for hot if used).
Connect other end to tap; hand-tighten, then quarter turn with pliers.
Place drain hose in standpipe (60-100 cm height) or over sink edge; secure with hook.

Tip: Ensure drain hose is not kinked and is lower than machine top.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use compartments I and II as needed; fabric softener in *.
Select program: Turn dial (e.g., Cotton for cottons, Synthetics for blends).
Adjust settings: Press Temperature and Spin Speed buttons to modify.
Add options: Press Extra Rinse, Delay Start, etc.
Start: Press Start/Pause; door locks automatically.
End of cycle: "End" appears; door unlocks after a few minutes.

WARNING! Do not open door during wash; wait for unlock symbol.

Special Functions

Delay Start: Press button to set 1-24h delay; machine starts automatically. Child Lock: Press and hold Temperature and Spin Speed for 3 seconds to lock controls. Extra Rinse: Adds an additional rinse cycle. Anti-Allergy: Higher temperature rinse to reduce allergens. Drum Clean: Run monthly without laundry to clean drum.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support in Italy, contact Hotpoint Assistenza Tecnica at 848 800 123 or visit www.hotpoint.it.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Door not closed/power	Close door firmly; check plug and power; ensure child lock off.
No water intake	Tap closed/hose kinked	Open tap; check hose for kinks; clean inlet filter.
Water does not drain	Drain blocked/pump filter	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 848 800 123; www.hotpoint.it