Hotpoint washing machine NR 849G WS A IT manual

The Hotpoint NR 849G WS A IT is a freestanding washing machine with a 9 kg load capacity, energy efficiency class A, multiple wash programs, electronic controls, delay timer, child lock, and safety features. It operates on a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and door with safety lock.

Feature	Description
Capacity	9 kg maximum load
Energy Class	A (high efficiency)
Spin Speed	Up to 1400 RPM
Programs	Cotton, Synthetic, Delicate, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	LED with time remaining and cycle indicators
Door Lock	Safety lock during operation
Adjustable Feet	For leveling the machine
Detergent Dispenser	Compartments for pre-wash, main wash, softener

Installation

Unpack and inspect contents. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; ensure no kinks.
Level the machine: Adjust feet using a wrench; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on the machine; run an initial empty wash cycle.

Set language: Press and hold PROGRAM button for 3 seconds to select language (default ITALIAN).
Test water connections: Run a quick Rinse cycle to check for leaks.
Load detergent: Fill dispenser with a small amount of detergent for the first wash.
Select program: Choose Cotton 60°C for initial cleaning of the drum.
Start cycle: Press START/PAUSE to begin.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: NR 849G WS A IT
Capacity: 9 kg (dry cotton)
Dimensions (HxWxD): 85 x 60 x 60 cm
Energy Rating: A
Water Consumption: Approx. 50 liters per cycle (cotton 60°C)
Spin Speed: 1400 RPM (adjustable)
Programs: 15 programs including Eco, Quick, Delicate, Wool
Power Supply: 220-240V, 50Hz
Max Inlet Pressure: 1 MPa (10 bar)
Min Inlet Pressure: 0.05 MPa (0.5 bar)

Controls and Settings

Access settings via the control panel. Buttons: POWER, PROGRAM, TEMPERATURE, SPIN SPEED, OPTIONS, DELAY, START/PAUSE.

Display: Shows selected program, time remaining, temperature, spin speed, and option icons.

Program Selection: Rotate PROGRAM knob to choose (Cotton, Synthetic, Delicate, Wool, Quick 30', etc.). Temperature: Adjust from cold to 90°C. Spin Speed: Adjust from 0 (no spin) to 1400 RPM. Options: Extra Rinse, Pre-wash, Stain Removal, Silent Mode. Delay Timer: Set start time up to 24 hours. Child Lock: Press and hold OPTIONS and TEMPERATURE for 3 seconds.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Drain: Place hose in standpipe (max height 100 cm).

Turn off taps before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Ensure drain hose is not submerged to prevent siphoning.
Check for leaks after connections.

Tip: Install a drip tray if placing on wooden floors.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn PROGRAM knob (e.g., Cotton for normal loads).
Adjust settings: Set temperature, spin speed, and options as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock signal.
End of cycle: Signal sounds; door unlocks after a short delay.

WARNING! Do not open door during spin cycle. Remove items promptly after cycle to avoid wrinkles.

Special Functions

Delay Start: Set delay timer for up to 24 hours. Child Lock: Locks control panel. Silent Mode: Reduces spin noise. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Drum Clean program every 30 cycles (use washing machine cleaner). Check and clean drain pump filter periodically.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured according to ISO 9001 standards. Copyright © Hotpoint; trademarks owned by Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service in Italy.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug and power; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/pump filter	Check hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling/load	Ensure transit bolts removed; re-level machine; redistribute load.
Door will not open	Cycle running/water inside	Wait for cycle end or unlock signal; drain water if emergency unlock needed.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 minutes and retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Hotpoint service center; www.hotpoint.eu/support