Hotpoint washing machine NM11 846 WS A EU N manual

The Hotpoint NM11 846 WS A EU N is a freestanding washing machine with a load capacity of 11 kg, energy class A+++, 1600 rpm spin speed, and multiple wash programs. It features a digital display, delay start, child lock, anti-crease function, and is designed for household use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Drum, detergent dispenser, control panel, display, water inlet valves, drain pump, adjustable feet.

Feature	Description
Load capacity	11 kg maximum dry laundry
Energy class	A+++ for high efficiency
Spin speed	Up to 1600 rpm
Display	Digital with time remaining indicator
Programs	15 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay start	Up to 24 hours
Child lock	Prevents accidental program changes
Anti-crease	Reduces wrinkles after wash
Door lock	Automatic during operation
Adjustable feet	For leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; ensure machine is stable.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first use, run a maintenance wash.

Check installation: Ensure hoses are secure and machine is level.
Power on: Plug in and press POWER button.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use settings menu for language, buzzer volume, etc.
Load laundry: Do not exceed 11 kg; distribute evenly.

CAUTION! Use only recommended detergents. Overloading may cause imbalance.

Specifications

Model: NM11 846 WS A EU N
Capacity: 11 kg
Energy Rating: A+++
Spin Speed: 1600 rpm (adjustable)
Water Pressure: 0.5 - 8 bar
Programs: 15 including Eco, Wool, Sport, Mix
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: 53 dB (wash), 75 dB (spin)
Weight: 70 kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTION buttons, DELAY START, CHILD LOCK.

Display: Shows program time, options, delay time, error codes.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Quick Wash (30°C), Eco 40-60, Wool, Silk, Sport, Mix, Drum Clean. Options: Extra Rinse, Pre-wash, Anti-crease, Speed Wash, Low Temp. Settings: Language, buzzer volume, default spin speed, child lock activation.

Connecting Water & Drain

Water Inlet: Two hoses (blue for cold, red for hot). Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect hoses to machine and taps; tighten securely.
Place drain hose in standpipe (max height 100 cm) or over sink edge.
Check for leaks after first use.

Tip: Use hose clips if provided. Do not kink hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, place items evenly in drum.
Add detergent: Pour into dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn PROGRAM SELECTOR knob.
Set options: Press OPTION buttons (e.g., Extra Rinse).
Start: Press START/PAUSE; door locks automatically.
After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during wash; wait for unlock signal. Remove coins/objects from pockets.

Special Functions

Delay Start: Press DELAY START to set start time (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Anti-crease: Reduces wrinkles by tumbling periodically after wash. Drum Clean: Run monthly with detergent to maintain hygiene.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly; remove and rinse under tap. Clean door seal and glass to prevent mold. Run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE compliant; meets EU safety and environmental standards. Waste electrical products must not be disposed of with household waste; recycle according to local regulations. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug and power; ensure door is closed properly.
No water intake	Taps/hoses	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Error codes on display	Various faults	Refer to error code list in manual; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset electronic control.

Service: +44 (0) 344 822 4224; www.hotpoint.eu