Hotpoint washing machine NM11 846 WC A UK N manual

The Hotpoint NM11 846 WC A UK N is a freestanding washing machine with an 11kg capacity, A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain Technology, Direct Spray pre-wash, delay timer, child lock, and easy iron function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 11kg drum, electronic control panel, detergent drawer, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	11kg for large laundry loads
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM for faster drying
Anti-Stain Technology	Automatically treats tough stains
Direct Spray	Pre-wash spray for better stain removal
Programs	16 programs including Cotton, Synthetics, Delicates
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Easy Iron	Reduces creasing for easier ironing
Quick Wash	30-minute program for lightly soiled items

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using spanner; use spirit level.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Connect power and water: Ensure taps are fully open.
Add detergent: Pour 100ml of detergent into drawer II (main wash).
Select program: Turn knob to "Cotton 90°C" without laundry.
Start cycle: Press Start/Pause; let complete to clean drum.
Set preferences: Use option buttons to adjust spin speed, temperature etc.

CAUTION! Ensure machine is level to prevent vibration. Check hose connections for leaks.

Specifications

Model: NM11 846 WC A UK N
Capacity: 11kg (cotton)
Energy Class: A+++
Spin Speed: 1400 RPM (adjustable)
Water Pressure: 0.5 - 8 bar
Programs: 16 including Eco 40-60, Wool, Hand Wash, Sport
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Max Load: 11kg cotton, 4kg synthetics
Noise Level: 53 dB (washing), 73 dB (spinning)

Controls and Settings

Control Panel: Program knob, display, option buttons, Start/Pause.

Program Knob: Select from 16 programs (Cotton, Synthetics, Delicates, Wool, etc.).

Option Buttons: Temperature (20°C-90°C), Spin Speed (0-1400 RPM), Delay (1-24h), Easy Iron, Extra Rinse, Pre-wash. Display: Shows time remaining, selected options, error codes. Start/Pause: Starts or pauses cycle. Child Lock: Press Temp + Spin for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold fill only (or hot/cold if model has dual inlet). Drain: To standpipe or sink.

Turn off machine and water supply.
Connect hoses: Screw inlet hoses to taps; do not overtighten.
Drain hose: Insert into standpipe (min 60cm height) or secure over sink edge.
Check for leaks: Turn on taps; inspect connections.

Tip: Use only provided hoses; replace if damaged. Ensure drain hose is not kinked.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use drawer I (pre-wash), II (main wash), III (softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Adjust options: Press Temp, Spin, etc. to customize.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to pause; turn knob to change program (if not locked).
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high temperature washes. Remove items promptly after cycle.

Special Functions

Anti-Stain: Automatically selects optimal settings for stains (activate with button). Direct Spray: Pre-wets laundry for better stain removal. Easy Iron: Reduces spin speed to minimize creases. Extra Rinse: Adds rinse for sensitive skin. Delay Start: Set 1-24 hours delay. Child Lock: Locks controls (press Temp + Spin 3 sec).

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Remove and rinse under warm water.
Door seal: Wipe with damp cloth; remove debris.
Filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean.
Drum: Run "Drum Clean" program monthly (without laundry).

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 247 365 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug/power; press Start/Pause.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Machine vibrates	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Water not draining	Drain hose/filter blocked	Check hose for kinks; clean pump filter.
Error code on display	Various faults	Consult manual for code meaning; reset by turning off/on.
Detergent not dispensing	Drawer blocked	Clean detergent drawer compartments.

Reset: Turn program knob to Off for 10 seconds, then restart.

Service: 03448 247 365 (UK); www.hotpoint.co.uk