Hotpoint washing machine NM11 846 GC A UK N manual

The Hotpoint NM11 846 GC A UK N is a freestanding washing machine with a 11kg capacity, A+++ energy rating, and 1400 rpm spin speed. It features multiple wash programs, direct injection technology, anti-allergy cycles, delay start, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	11kg drum for large laundry loads
Energy Rating	A+++ for high energy efficiency
Spin Speed	Up to 1400 rpm for faster drying
Direct Injection	Technology for precise water distribution
Anti-Allergy Cycle	Eliminates 99.9% of allergens
Delay Start	Program start delayed up to 24 hours
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system
Quick Wash	30-minute cycle for lightly soiled items
Digital Display	Shows time remaining and program status

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue标记) and machine.
Connect drain hose: Place in standpipe or hook over sink edge (max height 100cm).
Level the machine: Adjust front feet using spanner; use spirit level.
Plug into grounded power socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

Add detergent: Pour 100ml detergent into drawer compartment II.
Select program: Turn dial to "Cotton 90°C".
Start cycle: Press Start/Pause; let complete to clean drum.
Set preferences: Use Settings button for buzzer volume, etc.

CAUTION! Ensure machine is level to prevent vibration. Check all hose connections for leaks.

Specifications

Model: NM11 846 GC A UK N
Capacity: 11kg (cotton)
Energy Rating: A+++ (scale A+++ to D)
Annual Energy Consumption: 175 kWh
Water Consumption: 10200 litres/year
Spin Speed: 1400 rpm (max)
Noise Level: 74 dB (wash), 78 dB (spin)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 78 kg
Power Supply: 220-240V, 50Hz
Programs: 16 including Cotton, Synthetics, Delicates, Wool, Quick Wash

Controls and Settings

Control Panel: Rotary dial for program selection, digital display, Start/Pause, Delay Start, Settings, and Child Lock buttons.

Program Dial: Select from 16 programs (Cotton, Synthetics, Delicates, Wool, etc.). Digital Display: Shows time remaining, cycle phase, error codes. Buttons: Start/Pause (starts or pauses cycle), Delay Start (sets 1-24 hour delay), Settings (adjusts buzzer, etc.), Child Lock (press 3 sec to activate).

Settings Menu: Buzzer volume (High/Low/Off), End of cycle signal (On/Off), Remote Control activation (if applicable).

Connecting Water & Drain

Water Inlet: Cold fill only (blue标记 hose). Drain: Hose to standpipe or sink.

Turn off water tap before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Ensure drain hose is not kinked and is secured.
Check for leaks after first connection.

Tip: Use hose clips if supplied. Do not extend drain hose beyond 1.5m.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 11kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn dial (e.g., Cotton for cottons, Synthetics for synthetics).
Adjust options: Press Delay Start if needed; press Start/Pause.
Monitor: Display shows time remaining; door locks during cycle.
Unload: Wait for door unlock signal; remove laundry promptly.

WARNING! Do not open door during wash; wait for unlock. Do not exceed max load.

Special Features

Anti-Allergy Cycle: Uses higher temperature and extra rinses. Delay Start: Program start delayed up to 24 hours. Child Lock: Locks controls when activated (press 3 sec). AquaStop: Automatically shuts off water if leak detected.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, and filters.

Detergent drawer: Pull out; wash under warm water.
Drum: Run empty "Drum Clean" cycle or 90°C cotton program monthly.
Filter: Turn off machine; open filter cover at front bottom; clean filter under tap.
Door seal: Wipe with damp cloth to remove residue.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

EU Ecodesign Directive compliant. WEEE symbol indicates separate collection for electrical waste. Conforms to UK safety standards. Copyright © Hotpoint. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and socket; ensure child lock off.
No water intake	Taps/hoses/filter	Open water taps; check hose for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts/level/load	Ensure transit bolts removed; level machine; redistribute load.
Water not draining	Drain hose/filter	Check drain hose for kinks/blockage; clean pump filter.
Error code on display	Various faults	Consult manual error code list; reset by unplugging for 1 min.
Detergent not dispensing	Drawer blocked	Clean detergent drawer compartments; use correct detergent type.

Reset: Unplug for 1 minute; plug back in.

Service: 0333 305 2265; www.hotpoint.co.uk